| after pump gravel injection system | 泵后加砂注入系统 |
| AIR | 平均注入速度 |
| alternating injection | 交替注入 |
| average daily injection | 平均日注入量 |
| backup injection well | 后备注入井 |
| basic flooding pattern | 基础注入井网 |
| bidematron | 电子束注入分配放射磁控管放大器 |
| bilge injection | 舱底水注入装置 |
| bimatron | 电子束注入式磁控管 |
| boric acid injection | 硼酸注入 |
| breakthrough of injection water | 注入水突破 |
| bung hole | 注入孔 |
| cement-filled inflatable casing packer | 注入水泥的膨胀式套管封隔器 |
| chemical injection | 化学剂注入 |
| CIP | 稳定注入压力 |
| concordant injection | 顺层注入 |
| constant flow injection pump | 恒流量注入泵 |
| continuous injection | 连续注入 |
| crestal injection well | 构造顶部注入井 |
| cumulative injection in pore volumes | 以孔隙体积计量的累计注入量 |
| cumulative injection | 累积注入量 |
| current injection rate | 目前注入速率 |
| cyclic injection | 周期性注入 |
| daily average injection rate | 平均日注入量 |
| design injection rate | 设计注入速度 |
| diadysite | 注入融合岩 |
| differential injection profile | 微差注入剖面 |
| diluent injection rate | 稀释液注入流量 |
| diurnal injection | 日注入量 |
| down stream sand injection | 泵后加砂注入 |
| downhole injection system | 井下注入系统 |
| dual string injection | 双管注入 |
| electron-injection | 电子注入 |
| entexis | 注入混合作用 |
| entire injection interval | 总注入层段 |
| entry profile | 注入剖面 |
| far producer | 远离注入井的生产井 |
| field injectivity test | 现场注入能力试验 |
| fieldwide simultaneous injection | 全油田同时注入 |
| fill nipple | 注入接头 |
| filling orifice | 注入孔 |
| fillup valve | 注入阀 |
| flood operation | 流体注入作业 |
| flood water | 注入水 |
| floodable pore | 可注入的孔隙 |
| followup slug | 随后注入的段塞 |
| forced injection | 强制注入 |
| fuel injector | 燃料注入器 |
| gas input factor | 注入气油比 |
| hole-injection rate | 空穴注入速度 |
| hole-injection | 空穴注入 |
| IGLR | 注入气液比 |
| IGOR | 注入气油比 |
| implantttion technique | 注入技术 |
| imput | 注入 |
| index well | 基准井；注入井 |
| individual-well injection rate | 单井注入量 |
| induced water | 注入水 |
| inflating port | 膨胀式封隔器液体注入口 |
| infuser | 注入器；浸溃器 |
| infusion in seam | 向地层注入 |
| infusion | 注入 |
| iniect | 注入 |
| injectability | 注入能力 |
| injectant | 注入剂 |
| injected fluid front | 注入流体前缘 |
| injected fluid viscosity | 注入流体粘度 |
| injected gas breakthrough | 注入气突破 |
| injected gas front | 注入气前缘 |
| injected gas volume | 注入气量 |
| injected gas-oil ratio | 注入气与采出 油之比 |
| injected particles | 注入机械杂质 |
| injected phase | 注入相 |
| injected water volume | 注入水量 |
| injecting material | 注入材料 |
| injection bottomhole pressure | 井底注入压力 |
| injection circuit | 注入电路 |
| injection control | 注入控制 |
| injection downdip | 下倾方向注入 |
| injection end | 注入端 |
| injection face | 注入面 |
| injection fluid | 注入流体 |
| injection heat | 注入热量 |
| injection history | 注入史 |
| injection interval | 注入层段 |
| injection manifold | 注入管汇 |
| injection pattern alteration | 注入井网转换 |
| injection pattern | 注入井网 |
| injection performance | 注入动态 |
| injection plant | 注入站 |
| injection pore volume | 注入孔隙体积 |
| injection pressure buildup | 注入井压力上升 |
| injection pressure | 注入压力 |
| injection profile height | 注入剖面厚度 |
| injection profile modification | 注入剖面调整 |
| injection pump | 注入泵；喷射泵；高压油泵 |
| injection rate | 注入量 |
| injection row | 注入井排 |
| injection sandface pressure | 井底注入压力 |
| injection side | 注入端 |
| injection test | 注入试验 |
| injection water quality | 注入水水质 |
| injection water salinity | 注入水含盐度 |
| injection well conversion | 注入井转换 |
| injection well performance | 注入井动态 |
| injection well pressure | 注入井压力 |
| injection well row | 注入井排 |
| injection well spacing | 注入井控制面积；注入井井距 |
| injection well testing | 注入井试井 |
| injection well | 注入井 |
| injection | 注入；注射；喷射 |
| injection-fluid front | 注入液前缘 |
| injection-gas-liquid ratio | 注入气-液比 |
| injection-pore volume ratio | 注入孔隙体积比 |
| injection-quality water | 符合质量要求的注入水 |
| injection-type structure | 注入型构造 |
| injectivity behavior | 注入动态 |
| injectivity index | 注入指数；吸水指数 |
| injectivity response | 注入能力增加 |
| injectivity test | 注入井吸入能力测试 |
| injector head | 注入头 |
| injector performance | 注入井动态 |
| injector | 注入器 |
| input gas | 注入气 |
| input gas-oil ratio | 注入气量与采出油量之比 |
| input horizon | 注入层 |
| input pattern | 注入井网 |
| input profile | 注入剖面 |
| input rate | 注入率 |
| input speed | 输入速度；注入速度；进料速度 |
| input well | 注入井 |
| instillation | 滴注；注入；滴注物；浸润物 |
| insulated injection string | 保温注入管柱 |
| intake volume | 注入量 |
| intake well head pressure | 注入井井口压力 |
| intake well | 注入井 |
| integrated injection logic | 集成注入逻辑 |
| interior injector | 内部注入井 |
| intermittent injection | 间歇注入 |
| interval rate of injection | 阶段注入速度 |
| IR | 注入量 |
| IW | 注入井 |
| line of injecting wells | 注入井排 |
| lit-par-lit injection | 间层注入 |
| loading chemical | 注入化学剂 |
| low injection pressure | 低注入压力 |
| mechanical injection device | 机械注入装置 |
| multizone injection well | 多层注入井 |
| nine-spot well injection configuration | 九点注入井网 |
| nonisothermal injection | 非等温注入 |
| off-pattern injector | 井网外注入井 |
| off-tract injection system | 开采区外的注入系统 |
| offset injection rate | 补偿油层亏空的注入量 |
| offsetting injector | 相邻的注入井 |
| over-flush injection | 后置液注入 |
| overdisplacement | 后置液注入 |
| overshot tank filling | 自顶部注入油罐内 |
| pattern injector | 井网注入井 |
| perforation injectivity | 炮 眼注入能力 |
| peripheral injection well | 边缘注入井 |
| peripheral injector | 边缘注入井 |
| pig injector valve | 清管器注入阀 |
| PIP | 生产注入封隔器 |
| pore volume injected | 注入的孔隙体积倍数 |
| positive injection gravel compaction metering unit | 砾石注入充填计量装置 |
| preflood | 注入前的 |
| pressure well | 注入井 |
| problem injector | 难处理的注入井 |
| producer-to-injector ratio | 生产井-注入井井数比 |
| protonation | 质子注入 |
| PVI | 注入的孔隙体积倍数 |
| quantity of injected water | 注入水量 |
| random injected signal | 随机注入信号 |
| rate of injection | 注入速率 |
| ratio of injected air to produced oil | 注入空气-采出原油比 |
| ratio of producers to injectors | 生产井数-注入井数比 |
| recirculating pump | 循环泵；注入泵 |
| reflooded | 再注入的 |
| restored-state flooding experiment | 复原状态注入实验 |
| sand face injection pressure | 井底注入压力 |
| selective injection | 选择性注入 |
| simultaneous injection well | 多层注入井 |
| simultaneous injection | 同时注入 |
| single zone injection well | 单层注入井 |
| slick-water injection test | 减水阻注入试验 |
| sogicon | 注入式半导体振荡器 |
| soluble plug injector | 可溶塞注入器 |
| specific injectivity index | 单位注入指数 |
| squeeze injection | 强迫注入 |
| SSWID | 地下盐水注入和处置 |
| stabilized injection | 稳定注入 |
| step rate injectivity | 阶跃注入率 |
| step-rate injectivity test | 台阶状流量注入试井 |
| straight injection | 连续注入 |
| subsurface flood performance | 地下注入动态 |
| surface injection pressure | 地面注入压力 |
| tagged injection water | 含示踪剂的注入水 |
| tail-in | 尾随注入 |
| threshold injection pressure | 启动注入压力 |
| total injectivity | 总注入能力 |
| traced injection water | 示踪注入水 |
| tracer injector | 示踪注入井；示踪剂注入器 |
| two-rate injection test | 两级流量注入测试 |
| uneven injection | 不均匀注入 |
| vectored injection | 定向注入 |
| volume of water input | 注入水量 |
| volumetric air injection rate | 空气注入体积流量 |
| WAG cycle | 水-气交替注入周期 |
| WAG injector | 水-气交替注入井 |
| WAG ratio | 水-气交替注入比 |
| WAG | 水-气交替注入 |
| water thruput pore volumes | 以地层孔隙容积为计量单位的注入水量 |
| well intake pressure | 井口注入压力 |