| 2D pore network model | 二维孔隙网络模型 |
| abraded perforation | 磨蚀的射孔眼 |
| abrasive perforating | 喷砂射孔 |
| abscess | 气孔；砂眼；脓肿 |
| absolute porosity | 绝对孔隙度 |
| acanthopore | 刺孔 |
| access eye | 检查孔 |
| access hole | 检查孔；检修孔；出入孔 |
| access | 接近；访问；进入；发作；增加；存取；调整孔；取数 |
| acoustic porosity | 声波孔隙度 |
| Actinodictyon | 射网格层孔虫属 |
| Actinoporella | 辐孔藻属 |
| active porosity | 有效孔隙度 |
| actual porosity | 有效孔隙度 |
| additional porosity | 附加孔隙度 |
| Adetopora | 自由孔珊瑚属 |
| aeration porosity | 充气孔隙 |
| Agarum | 孔叶藻属 |
| air cap | 气孔 |
| air escape | 排气孔 |
| air hole | 通气孔 |
| air puncher | 风动凿孔机 |
| air vent | 排气孔 |
| air voids | 气孔；含气率 |
| airport plug | 通气孔塞 |
| alphabetical puncher | 字母穿孔机 |
| alternate pitting | 互列纹孔式 |
| aluminum link capsule gun | 连杆式铝质弹壳射孔器 |
| amphirhinal | 双鼻孔 |
| anchor | 套管固定器；射孔弹固定器；锚 |
| angular aperture | 孔径角 |
| annular auger | 环孔钻 |
| annular boring | 环孔钻 |
| annular bypass port | 环空旁通孔 |
| annular orifice | 环形孔板 |
| anoxic marine porewater | 缺氧海相孔隙水 |
| antenna aperture | 天线孔径 |
| Anthracoporella | 炭孔藻属 |
| antipriming pipe | 多孔管 |
| apertometer | 孔径测量计 |
| aperture angle | 孔径角 |
| aperture card | 穿孔卡 |
| aperture of screen | 筛孔 |
| aperture of sight | 观测孔 |
| aperture setting | 孔径定位 |
| aperture time | 孔径时间 |
| aperture width | 孔径宽度 |
| aperture | 小孔；孔隙；光圈 |
| apparent porosity | 视孔隙度 |
| apparent sonic porosity | 视声波孔隙度 |
| APS | 加速器型孔隙度探测器 |
| Araiostrotion | 孔壁柱珊瑚属 |
| arbor hole | 心轴孔 |
| Atelodictyon | 不全网层孔虫属 |
| atmolysis | 微孔分气法 |
| automatic gun release sub | 射孔器自动丢手接头 |
| automatic tape puncher | 自动纸带穿孔机 |
| available pore space | 有效孔隙空间 |
| axially extending bore | 轴向通孔 |
| balanced hole | 平衡孔 |
| ball plug | 弹子孔塞销 |
| ball-bore calibration device | 球-孔标定装置 |
| bar actuated pressure vent | 杆式驱动液压排出孔 |
| barrel reamer | 筒形扩孔器 |
| barren | 荒芜的；空白的；多孔的；无矿的；无用的 |
| barrier charge | 隔板式射孔弹 |
| base bore | 基孔 |
| basic bore | 基孔 |
| basic hole system | 基孔制 |
| basic porosity equation | 基本孔隙度公式 |
| Basopollis | 三突孔室粉属 |
| beam angle | 射束孔径角 |
| bearizing | 扩孔；轴承支撑面密封 |
| Beatricia | 轴管层孔虫属 |
| bellows-type gas or orifice meter | 伸缩式气体孔板流量计 |
| beltscanner | 长凿孔带自动发报机 |
| benthonic foraminifera | 底栖有孔虫类 |
| benthonic foraminiferal assemblages | 底栖有孔虫组合 |
| BH | 钻孔 |
| bicontinuous porous media | 双连续多孔介质 |
| Big Bertha | 短柄大链钳；大钻孔器 |
| big casing gun | 大套管射孔器 |
| big-entry-hole | 大射孔孔眼 |
| big-hole perforator | 大孔眼射孔器 |
| Bipolarsporites | 双孔球形孢属 |
| Biporisporites | 双孔球形孢属 |
| bird's-eye porosity | 鸟眼孔隙 |
| bivariate pore volume distribution | 二元孔隙体积分布 |
| bivariate pore-size distribution | 二元孔隙大小分布 |
| biwire gun | 双钢筋射孔器 |
| blast joint hole | 地层砂冲蚀在耐冲蚀管上形成的孔 |
| bleed hole | 排出孔 |
| bleed | 泄放孔；放出的液体 |
| bleeder vent | 透气孔 |
| blind hole | 不返泥浆的漏井；瞎井；盲孔 |
| blind pore volume | 盲孔隙体积 |
| blind pore | 盲孔隙 |
| blink | 瞬间；瞥见；闪光；表面浅洼型缩孔 |
| block porosity | 基块孔隙度 |
| blow | 吹风；烧断；吹炼；鼓风；气孔 |
| body-free shaped Charge | 无枪身聚能射孔弹 |
| bolt hole | 螺栓孔 |
| bore out | 镗孔 |
| bore | 钻；镗；打眼；孔 |
| bored pile | 螺旋钻孔桩 |
| borer | 镗床；镗孔刀具；穿孔器 |
| boring apparatus | 钻孔设备 |
| boring bit | 钻孔钻头 |
| boring cutter | 钻孔器 |
| boring master | 钻孔工长 |
| boring organism | 钻孔生物 |
| boring pore | 生物钻孔 |
| boring porosity | 生物钻孔孔隙度 |
| boring | 镗孔 |
| boroscope | 内孔表面检查仪 |
| bottle-neck pore | 瓶颈状孔隙 |
| boundary pore | 边界孔隙 |
| box-like pore | 箱状孔隙 |
| Boyle's law porosimeter | 波义耳定律孔隙仪 |
| BPSD | 二元孔隙大小分布 |
| breaker plate | 多孔板 |
| breccia pore | 灰岩内的角砾孔隙 |
| Brigg's clinophone | 勃瑞格斯型钻孔测斜仪 |
| broacher | 剥孔机；绞孔机；拉床 |
| broaching | 扩孔 |
| bulging cylindrical hole | 膨胀圆柱形孔眼 |
| bulk porosity | 按体积平均孔隙度 |
| bullet gun | 射孔器 |
| bullet hole | 射孔孔眼 |
| bullet perforation | 子弹射孔 |
| bullet perforator | 射孔器 |
| bullhead | 平面孔型 |
| bullport | 引导孔 |
| bung hole | 注入孔 |
| bung | 塞子；桶孔 |
| burr free perforation | 无毛刺射孔孔眼 |
| burrless perforating | 无毛口射孔 |
| burrow pore | 生物钻孔 |
| burrow porosity | 虫掘孔隙 |
| Butterworth hole | 洗舱孔 |
| button-screen pipe | 筛孔中有过滤网的衬管 |
| by-pass port | 旁通孔 |
| bypass louver | 旁通散热孔 |
| cake porosity | 泥饼孔隙度 |
| Calorstylis | 孔壁珊瑚属 |
| capillary bore | 毛细管孔 |
| capillary channel | 毛细孔道 |
| capillary interstice | 毛细孔隙 |
| capillary pore | 毛细管孔隙 |
| capillary porosity | 毛细管孔隙度 |
| capillary void | 毛细孔隙 |
| capillary-size pore | 毛细孔隙 |
| capsule gun | 弹座式射孔器 |
| card punch | 卡片穿孔机 |
| card punched unit | 卡片穿孔机 |
| card puncher | 卡片穿孔机 |
| card read punch | 卡片阅读穿孔机 |
| card reader-punch | 卡片读出穿孔机 |
| Carnegia | 卡内基层孔虫属 |
| carrier gun | 传送管射孔枪 |
| carrotless charge | 无杵堵射孔弹；不填塞的炸药包 |
| cased and perforated productivity | 下套管射孔井的产能 |
| casing gun | 套管射孔器 |
| casing patch tool | 套管补孔器 |
| casing perforator | 套管射孔器 |
| cavern porosity | 溶洞孔隙 |
| cavernous dolomite | 孔状白云岩 |
| cavernous limestone | 孔状灰岩 |
| cavernous opening | 孔穴状缝隙 |
| cavernous porosity | 孔洞孔隙度 |
| cavernous weathering | 孔状风化 |
| CDP | 电导率导出的孔隙度 |
| cell quartz | 多孔石英 |
| cell texture | 多孔状结构 |
| cellular bauxite | 多孔状铝土矿 |
| cellular concrete | 多孔混凝土 |
| cellular dolomite | 多孔状白云岩 |
| cellular porosity | 蜂窝状孔隙 |
| cellular quartz | 多孔石英 |
| cellular | 多孔的 |
| center bore | 中心孔 |
| center hole | 中心孔 |
| center pit | 中心孔 |
| center roof vent | 中心通气孔 |
| centre drilling tool | 打中心孔工具 |
| ceramic capsule charge | 陶瓷射孔弹 |
| ceramic encased charge | 陶瓷射孔弹 |
| cess | 多孔排水管 |
| chad | 孔屑 |
| chalky porosity | 白垩状孔隙 |
| channel boundary | 孔道边界 |
| channel closure | 孔道闭合度 |
| channel diameter | 孔道直径 |
| channel geometry | 孔道几何形态 |
| channel porosity | 渠道孔隙；通道孔隙度 |
| channel-flow technique | 孔道流法 |
| charge cluster | 聚能射孔弹组 |
| charge plane | 射孔弹装弹平面 |
| chart-recording orifice meter | 记录式孔板流量计 |
| check clock | 穿孔钟 |
| chemical perforating | 化学射孔 |
| chrysocolla | 硅孔雀石 |
| circulating opening | 泥浆循环孔 |
| circumferential spread of channels | 孔道沿外围分布 |
| clay porosity | 粘土孔隙度 |
| clean uniform perforation | 干净等径射孔孔眼 |
| clean-out box | 油罐清积孔；排污箱 |
| clean-out cover | 入孔盖 |
| clean-out hatch | 清扫孔 |
| clean-out opening | 清扫孔 |
| clean-out plate | 入孔盖板 |
| clear opening | 净孔 |
| clinograph | 钻孔测斜仪 |
| closed-cell foamed plastics | 闭孔泡沫塑料 |
| closely spaced perforation | 加密射孔 |
| cluster of pore | 孔隙簇 |
| cluster porosity | 簇状气孔 |
| clustered high-density shaped charges | 成组分布的高密度射孔弹 |
| CNTG | 双孔隙度中子测井仪 |
| coarse pore network | 粗孔隙网络 |
| coarse porosity | 粗孔隙 |
| code hole | 打码孔 |
| coefficient of orifice | 孔板系数 |
| collapsible orifice | 可收缩的孔板 |
| collimating aperture | 准直孔径 |
| combustion air metering hole | 燃烧空气计量孔 |
| communicating pore | 连通孔隙 |
| completion perforating | 完井射孔 |
| computed porosity | 计算的孔隙度 |
| concentric orifice with flange taps | 法兰取压同心锐孔板 |
| concentric orifice | 同心锐孔板 |
| Conclavipollis | 唇孔凹边粉属 |
| conductor hole | 导管井孔 |
| connected pore channel | 连通孔道 |
| connected porosity | 连通孔隙度 |
| constant-porosity line | 等孔隙度线 |
| constructional void porosity | 结构空间孔隙 |
| continuous porosity | 连通孔隙度 |
| contributory pore volume | 供油孔隙体积 |
| control punch | 控制孔 |
| conventional gun | 普通射孔器 |
| conventional jet perforating | 常规聚能喷流射孔 |
| conventional overbalanced perforating | 常规正压射孔 |
| convey tubing perforation | 油管传送射孔 |
| coral-stromatoporoid reefs | 珊瑚-层孔虫礁 |
| core pin plate | 穿孔杆板 |
| core pin | 穿孔杆；芯杆；销钉 |
| core porosity | 岩心孔隙度 |
| corrected density porosity | 校正了的密度测井孔隙度 |
| corrected neutron porosity | 校正了的中子测井孔隙度 |
| corrosion hole | 腐蚀孔 |
| counterbore | 平底扩孔钻 |
| countersinking | 锥形扩孔 |
| countersunk | 埋头孔 |
| cpp | 交会孔隙度 |
| crank bore | 曲柄连杆大头的孔 |
| cribellate | 具筛孔的 |
| crosshead inspection plate | 十字头视孔盖 |
| crossover port | 转向孔 |
| crossplot porosity | 交会孔隙度 |
| csk | 锥口孔 |
| cul-de-sac porosity | 不连通孔隙度 |
| cumulative injection in pore volumes | 以孔隙体积计量的累计注入量 |
| cumulative porosity percentage | 累积孔隙度百分数 |
| curtate | 横向穿孔区 |
| cutoff porosity | 截止孔隙度 |
| cutter arm | 扩孔器牙轮伸展臂 |
| cutting window | 井中套管开孔 |
| cylinder port | 液缸孔 |
| cylindrical pore | 圆柱形孔隙 |
| dead-end pore volume | 不连通孔隙体积 |
| dead-end pore | 不连通孔隙 |
| deburred bullet hole | 去毛刺的弹孔 |
| decentralized gun | 偏心射孔器 |
| decimal porosity | 以小数表示的孔隙度 |
| deck manhole | 浮顶单盘人孔 |
| deep penetrating charge | 深穿透射孔弹 |
| deep penetrator | 深井射孔弹 |
| deformable porous medium | 变形孔隙介质 |
| dendritic pore body | 枝状孔隙体 |
| density porosity | 密度孔隙度 |
| depositional porosity | 沉积期孔隙 |
| depth of pit | 蚀孔深度 |
| design pore volume | 设计孔隙体积倍数 |
| designated sieve size | 选定筛眼孔径 |
| dibble | 挖孔工具 |
| Dicellaesporites | 无孔双胞孢属 |
| Didymoporisporonites | 单孔双胞孢属 |
| differential porosity | 随地层走向而变化的孔隙度 |
| digit punch | 数据孔 |
| dimensionless pore volume | 无因次孔隙体积 |
| dip hatch | 量油孔 |
| Diporicellaesporites | 双孔多胞孢属 |
| Diporisporites | 双孔孢属 |
| Diporites | 双孔粉属 |
| directional drilling | 定向钻井；定向钻孔 |
| directional single-plane jet perforator | 单面定向聚能弹射孔器 |
| directionally drilled crossing | 定向钻孔穿越 |
| discharge hole | 排出孔 |
| discharge orifice | 排出孔 |
| disconnect pore | 隔开的孔隙 |
| disconnected pores | 不连通孔隙 |
| discontinuous porosity | 不连续孔隙 |
| disrupted porosity | 破裂孔隙 |
| dissolution porosity | 溶蚀孔隙度 |
| dit | 小孔砂眼；点号 |
| dome manhole | 圆顶人孔 |
| door sheet | 油罐人孔盖 |
| double porosity exponent | 双重孔隙度指数 |
| double porosity reservoir | 双重孔隙介质储层 |
| double porosity | 双重孔隙 |
| double punch | 双穿孔 |
| double-grip large bore single string packer | 双卡瓦大内孔单管封隔器 |
| double-porosity model | 双重孔隙介质模型 |
| double-porosity system | 双重孔隙介质 |
| double-ported valve | 双孔阀 |
| double-seal port collar | 双密封带孔短接 |
| DPL | 钻井孔隙度曲线 |
| drain hole | 排泄孔 |
| drainable porosity | 可泄油孔隙度 |
| drainhole completion | 泄油孔完井 |
| drainhole drilling | 泄油孔钻井 |
| drawhole | 拉拔模孔；缩孔 |
| drifter | 架式矿机；漂流物；漂流水雷；冲头；穿孔器 |
| drill collar bore | 钻铤内孔 |
| drill pipe bore | 钻杆内孔 |
| drill-hole magnetometer | 钻孔磁力仪 |
| drilled crossing | 钻孔穿越 |
| drilling porosity log | 钻井孔隙度曲线 |
| drilling | 钻孔；钻法；钻井；钻屑；训练 |
| dual mineral porosity method | 双矿物孔隙度法 |
| dual porosity behavior | 双重孔隙介质产层动态 |
| dual porosity CNL | 双孔隙度补偿中子测井 |
| dual porosity reservoir | 双重孔隙介质储层 |
| dual porosity | 双孔隙度 |
| dutchman | 夹在一对法兰中的垫片；留在接箍中的废管子头；螺孔中的断头螺丝 |
| Dyadosporonites | 双孔双胞孢属 |
| eccentered gun | 偏心射孔器 |
| eccentric orifice with flange taps | 法兰取压偏心孔板 |
| eccentric orifice | 偏心孔板 |
| ECP | 有效岩心孔隙度 |
| edge orifice | 锐边孔板 |
| effective aperture | 有效孔径 |
| effective core porosity | 有效岩心孔隙度 |
| effective pore radius | 有效孔径 |
| effective porosity | 有效孔隙度 |
| egress hole | 出口孔 |
| eighty-column puncher | 八十列穿孔机 |
| electrical penetrator | 电动穿孔器 |
| electrochemical perforator | 电化学射孔器 |
| electronic punch | 电子穿孔机 |
| eleven punch | 11行穿孔 |
| emergency drain | 紧急排放孔 |
| emplacement hole | 放置孔穴 |
| enerjet gun | 半消毁式过油管射孔器 |
| enlarge hole opener | 扩孔器 |
| enlarger | 扩孔器 |
| enlarging hole | 扩孔 |
| entry neck | 入口孔颈 |
| entry pore | 入口孔隙 |
| eogenetic porosity | 成岩早期孔隙 |
| epen cell foamed plastic | 开孔泡沫塑料 |
| EPP | 估计孔隙压力 |
| equal porosity line | 等孔隙度线 |
| equalizing port | 平衡孔 |
| equant-pore porosity | 等径孔隙度 |
| equilibrium porosity | 均衡孔隙度 |
| equivalent pore pressure | 当量孔隙压力 |
| equivalent porosity | 等效孔隙度 |
| escutcheon | 框；饰框；孔罩；铭牌 |
| etched channel | 酸蚀孔道 |
| evacuated pores | 真空孔隙 |
| excess pore pressure | 超孔隙压力 |
| exhaust opening | 排出孔 |
| exit aperture | 出口孔 |
| exit hole | 出口孔 |
| exit opening | 出口孔 |
| exit port | 出口孔 |
| exopore | 花粉外孔 |
| expanded perlite | 多孔珍珠岩 |
| expanded plastic | 多孔塑料 |
| expanding drill | 扩孔钻 |
| expanding drilling tool | 扩孔钻井工具 |
| expanding hole opener | 扩孔器 |
| expendable gun | 消毁式射孔器 |
| expendable through-tubing perforator | 消毁式过油管射孔器 |
| expendable-retrievable gun | 可回收的消毁式射孔器 |
| exploratory boring | 勘探钻孔 |
| explosive charge | 炸药；射孔弹 |
| extended punched-card code | 扩充穿孔卡码 |
| extra-long perforation tunnel | 特长射孔孔道 |
| Extratriporopollenites | 三突孔粉属 |
| eye failure | 孔眼引起的失效 |
| eye | 眼睛；视力；见解；眼状物；孔环；入口；信管口；光电池；打孔眼 |
| eyehole | 小孔 |
| eyelet | 小孔；眼圈；窥视孔；锁缝；金属圈；打小孔 |
| eyeletting | 打出小孔；在孔口形成唇；用空心铆钉接合板材 |
| F.D. | 加工和钻孔 |
| face of the channel | 岩层孔道面 |
| factor of porosity | 孔隙度 |
| fairlead | 引线孔 |
| feed hole | 磁带输送孔 |
| feeding channel | 供应孔道 |
| feeler plug | 测孔规 |
| female contact | 塞孔接点 |
| female receptacle | 塞孔盘 |
| fenestral porosity | 网格孔隙 |
| fenestrate | 穿孔的；假孔粉 |
| fenstral porosity | 网格孔隙 |
| ferroxyl test | 孔隙度试剂试验 |
| filled perforation tunnel | 淤塞的射孔孔道 |
| filling orifice | 注入孔 |
| fine pore | 小孔隙 |
| fine porosity | 小孔隙 |
| fine-pored | 微细孔隙的 |
| finely-porous | 微细孔隙的 |
| finite aperture | 有限孔径 |
| fissured porous medium | 裂缝性多孔介质 |
| fixed orifice | 固定孔 |
| flexible gun | 柔性射孔器 |
| floodable pore | 可注入的孔隙 |
| flow by port | 旁流孔 |
| flow matrix | 地层中渗流孔道系统 |
| flow perforation | 液流孔眼 |
| fluid-filled pore space | 含流体的孔隙空间 |
| flush perforation | 失败的射孔 |
| flushing port | 冲洗孔 |
| fluted drill | 直槽扩孔钻 |
| focal aperture | 聚焦孔径 |
| foram | 有孔虫 |
| foraminiferal limestone | 有孔虫灰岩 |
| foraminiferal ooze | 有孔虫软泥 |
| foraminiferous | 含有孔虫的 |
| foraminite | 有孔虫岩 |
| formation facctor-porosity relationship | 地层因数-孔隙度关系 |
| formation porosity | 地层孔隙度 |
| formed wire gun | 成型钢索射孔器 |
| forminifera | 有孔虫类 |
| fossiliferous porosity | 含化石孔隙 |
| four-way kone shot | 四向聚能射孔弹 |
| fraction porosity | 相对孔隙度 |
| fractional pore volume | 用小数表示的孔隙体积 |
| fractional porosity | 相对孔隙度 |
| fracture pore | 裂缝孔隙 |
| fracture porosity reservoir | 裂缝孔隙性储层 |
| fracture porosity | 裂缝孔隙度 |
| fracture-matrix porosity | 裂缝基岩孔隙度 |
| fractured porous media | 裂缝性孔隙介质 |
| fraise | 铣刀；扩孔钻 |
| framework porosity | 构架孔隙度 |
| free fluid porosity | 自由流体孔隙度 |
| fritted glass | 多孔玻璃 |
| fumarole | 喷气孔 |
| gadder | 凿孔机 |
| gang punch | 复穿孔 |
| gaping hole | 不渗透层的孔 |
| gaping place | 孔 |
| gas cavity | 气孔 |
| gas expansion porosimeter | 气体膨胀孔隙度仪 |
| gas orifice | 喷气孔 |
| gas vent | 气孔 |
| gas-bearing porosity | 含气孔隙度 |
| gas-filled porosity | 天然气充满的孔隙度 |
| gastropore | 胚孔；腹孔 |
| gauge hole | 量孔 |
| gauge seal | 量孔盖 |
| genetic porosity | 原生孔隙度 |
| geofluid | 岩石孔隙中的各种流体 |
| Gerronostroma | 柱层孔虫属 |
| glass encased charge | 玻璃外壳射孔弹 |
| granular porosity | 粒间孔隙性 |
| gravel packed perforation tunnel | 填满砾石的射孔孔道 |
| gravel pore opening | 砾石孔隙通道 |
| gravelsand filled perforation tunnel | 被砾石与地层砂混合物充填的射孔孔道 |
| grommet | 护孔环 |
| gross porosity | 总孔隙度 |
| grout hole | 灌浆孔 |
| growth-framework porosity | 生长格架孔隙性 |
| gun perforated casing | 射孔套管 |
| gun perforation | 射孔 |
| gun perforator | 子弹射孔器 |
| gun pointing device | 射孔器瞄准装置 |
| gun positioner | 射孔器定位器 |
| gun positioning | 射孔器定位 |
| gun release sub | 射孔器松开接头 |
| gun-perforated completion | 射孔完井 |
| gun-to-casing clearance | 射孔器-套管间隙 |
| handhole | 手孔 |
| hatch | 孔 |
| HCPV | 烃类占据的孔隙体积 |
| helm port | 舵柄进入转向轮系舱的孔口 |
| heterogeneous porous media | 非均质多孔隙介质 |
| high density pattern perforation | 高密度射孔 |
| high permeability channel | 高渗透孔道 |
| high shot density | 高射孔密度 |
| high-capacity channel | 高渗透孔道 |
| highly porous | 高孔隙度的 |
| hl | 孔 |
| hole enlarger | 扩孔器 |
| hole site | 孔位置 |
| hollow carrier gun | 回收式射孔器 |
| hollow carrier | 射孔器枪身 |
| hollow concrete | 大孔隙混凝土 |
| homogeneous porous medium | 均质孔隙介质 |
| honeycombed cement | 多孔水泥 |
| honeycombed grain | 多孔隙颗粒 |
| honeycombed | 多孔的 |
| horizontal boring machine | 水平钻孔机 |
| horizontal drilling process | 水平钻孔法 |
| horizontal earthboring machine | 横向钻孔机 |
| hpf | 每英尺孔数 |
| HPV | 含烃类孔隙体积 |
| hydraulic boring unit | 液压钻孔机 |
| hydraulic gun release sub | 射孔器水力丢手接头 |
| hydraulic jar penetration | 水力振击钻孔 |
| hydraulic jar perforation | 水力振击打孔 |
| hydraulic perforating gun | 液压射孔器 |
| hydraulic perforation | 水力喷射射孔 |
| hydrocarbon-filled porosity | 含烃有效孔隙度 |
| hydrophobic pores | 疏水孔隙 |
| imbibition channel | 自吸孔道 |
| impeller balance hole | 叶轮平衡孔 |
| imperforate Foraminifera | 无细孔有孔NFDA3 |
| imporosity | 无孔隙性 |
| imporous | 无孔隙的 |
| in situ porosity | 地层原始孔隙度 |
| in-situ pore pressure | 原始孔隙压力 |
| inaccessible pore | 不可进入的孔隙 |
| inactive porosity | 无效孔隙度 |
| Inapertisporites | 无孔单胞孢属 ；无孔孢属 |
| incipient fracture porosity | 原始裂缝孔隙度 |
| index hole | 索引孔 |
| induced porosity | 次生孔隙度 |
| inequality of pore size | 孔隙大小不均匀性 |
| ingate | 入口孔 |
| initial pore volume | 原始孔隙体积 |
| injection pore volume | 注入孔隙体积 |
| injection-pore volume ratio | 注入孔隙体积比 |
| inkbottle type pore | 墨水瓶式孔隙 |
| inlet orifice | 进入孔 |
| inner bore | 内孔 |
| inspection cover | 检查孔盖 |
| inspection door | 观察孔 |
| inspection hole | 检查孔 |
| inspection manhole | 检查人孔 |
| integrating orifice meter | 积分式锐孔流量计 |
| interconnected pores | 连通孔隙 |
| interconnected porosity | 连通孔隙度 |
| intercrystal microchannel | 晶间微孔道 |
| intercrystal pore | 晶间孔隙 |
| intercrystal porosity | 晶间孔隙度 |
| intercrystalline pore | 晶粒间孔隙 |
| intercrystalline porosity | 晶间孔隙度 |
| intergranular pore | 粒间孔隙 |
| intergranular porosity | 粒间孔隙度 |
| intergranular space | 粒间孔隙 |
| intergranular-intercrystalline porosity | 粒间-晶间孔隙度 |
| interlocking pore | 连通孔隙 |
| intermediate pore size | 中间孔隙大小 |
| intermediate porosity | 次生孔隙度 |
| internal pore surface | 孔隙内表面 |
| interparticle channel | 粒间孔道 |
| interparticle pore | 粒间孔隙 |
| interparticle porosity | 粒间孔隙度 |
| interpore | 孔隙间的 |
| interporopollenites | 内三孔粉属 |
| interrhombohedral porosity | 菱体间孔隙度 |
| intersecting perforation | 垂直于裂缝面射孔 |
| interstage punch | 奇数行穿孔 |
| interstitial fluid | 孔隙流体 |
| interstitial heterogeneity | 孔隙不均质性 |
| interstitial space | 孔隙空间 |
| interstitial surface area | 孔隙面积 |
| intracrystal porosity | 晶内孔隙度 |
| intracrystalline pore | 晶内孔隙 |
| intracrystalline porosity | 晶内孔隙度 |
| intragranular pore | 粒内孔隙 |
| intragranular porosity | 粒内孔隙度 |
| intraparticle porosity | 粒内孔隙度 |
| intrapore | 孔隙内的 |
| Intratriporopollenites | 内三孔粉属 |
| Intropunctosporis | 内孔状单缝孢属 |
| Involutisporonites | 单孔卷曲粉属 |
| IPL System | 综合孔隙度岩性系统 |
| irregular porosity | 不规则孔隙度 |
| isolated pore | 孤立孔隙 |
| isoporosity map | 等孔隙度图 |
| isoporosity | 等孔隙度 |
| J | 千斤顶；塞孔 |
| jack spring | 塞孔弹簧 |
| jack | 起重机；千斤顶；塞孔；弹簧开关；传动装置；收放动作筒；安全灯防风罩；闪锌矿；举起 |
| jagged hole | 有毛刺孔眼 |
| jet charge | 聚能射孔弹 |
| jet perforating | 聚能射孔 |
| jet perforator penetration | 聚能射孔穿透深度 |
| jet perforator | 聚能射孔器 |
| jet piercing | 热力喷射钻井；喷射穿孔 |
| jewel | 宝石；宝石饰物；穿孔宝石轴承；饰以宝石 |
| key card punch | 卡片穿孔机 |
| key-punched data | 键控穿孔数据 |
| keyboard perforator | 键盘穿孔器 |
| keyhole saw | 拴孔锯 |
| keyhole shaped orifice | 钥匙孔形喷孔 |
| keypunch | 键控穿孔；键控穿孔机 |
| kick-off collar | 带有启动孔的短节 |
| Kone shot | 聚能射孔弹 |
| L-band synthetic aperture radar | L波段合成孔径雷达 |
| Lacrimasporites | 中孔梨形孢属 |
| laddic | 拉蒂克多孔磁心 |
| lamellar pore | 叶片状孔隙 |
| large-aperture seismic array | 大孔径地震检波器组合 |
| LASA | 大孔径地震检波器组合 |
| leakoff port | 漏失孔 |
| lens aperture | 透镜孔径 |
| lens opening | 透镜孔径 |
| light hole | 透光孔 |
| lightening hole | 减轻孔 |
| limber hole | 船底骨两侧的渠孔 |
| limited penetration perforator | 有限穿深射孔器 |
| limited-entry perforation technique | 限流射孔技术 |
| linear porosity | 线性孔隙度 |
| lined-cavity charge | 聚能射孔弹 |
| link dikone gun | 链节式聚能射孔器 |
| liparite | 流纹岩；萤石；硅孔雀石；铁滑石 |
| litho-porosity crossplot | 岩性-孔隙度交会图 |
| local pore pressure | 局部孔隙压力 |
| loferite | 收缩孔碳酸盐岩 |
| lubrication hole | 加油孔 |
| lubrication port | 润滑孔 |
| M-N plot | 岩性-孔隙度交会图 |
| macropore | 大孔隙 |
| macroporous | 大孔隙的 |
| macroscopic pore structure | 宏观孔隙结构 |
| macroscopic void | 大孔洞 |
| macroshrinkage | 宏观缩孔 |
| macrovoid ratio | 大孔隙比 |
| MAD | 多孔磁心；多孔器件 |
| magnacard | 磁穿孔卡装置 |
| malachite | 孔雀石 |
| manhead | 罐底观测孔 |
| manhole cover | 人孔盖 |
| manhole frame | 人孔颈口 |
| manhole | 人孔 |
| manway | 人行走道；人孔 |
| Margodoporites | 边沟孔粉属 |
| MARS | 多孔磁阻开关 |
| matrix porosity | 基岩孔隙度 |
| mean-square channel diameter | 均方孔道直径 |
| mechanical perforator | 机械射孔器 |
| megapore | 巨孔隙 |
| membrane porosity | 薄膜孔隙性 |
| mercury intrusion pore size distribution | 压汞法孔隙大小分布 |
| mercury intrusion porosimeter | 压汞孔隙度仪 |
| mercury porometer | 水银孔隙度仪 |
| mercury porosimetry saturation | 水银孔隙度仪测定的饱和度 |
| mesh | 筛孔 |
| mesogenetic porosity | 中期形成的孔隙性 |
| mesopore | 中孔隙 |
| mesoporosity | 中孔隙 |
| metallic charge particle | 射孔弹金属颗粒 |
| mh | 人孔 |
| MH | 人孔；舱口 |
| micro-vuggy | 微孔的 |
| microballoons | 微孔毡 |
| microchannel | 微孔道 |
| microforaminifer | 微型有孔虫 |
| microforaminifera | 微型有孔虫类 |
| micropore space | 微孔隙空间 |
| micropore | 微孔隙 |
| microporosity | 微孔隙 |
| microporous membrane | 微孔薄膜 |
| microporous | 微孔性的 |
| microscopic pore structure parameter | 微观孔隙结构参数 |
| microshrinkage | 显微缩孔 |
| microvugular carbonate | 微孔洞碳酸盐岩 |
| migration aperture | 偏移孔径 |
| miliolid-coral-caprinid packstone | 粟孔虫-珊瑚-羚角蛤泥粒灰岩 |
| milled window in casing | 套管磨出孔 |
| millipore filter | 微孔滤器 |
| millipore plastic membrane filter | 微孔塑料膜过滤器 |
| minus-cement porosity | 无胶结孔隙性 |
| minute pore space | 微小孔隙空间 |
| modern perforating practice | 现代射孔技术 |
| modified gun | 改进型射孔器 |
| moldic pore | 印模孔隙 |
| moldic porosity | 印膜孔隙性 |
| Monoporisporites | 单孔环球孢属 |
| Monoporopollenites | 单孔粉属 |
| mooring pipe | 导缆孔 |
| mortise | 榫眼槽；沟；孔；接榫；牢固结合 |
| most permeable medium | 高渗透多孔介质 |
| mounting hole | 安装孔 |
| movable pore volume | 流体可驱移的孔隙容积 |
| MP method | 微孔法 |
| MP | 微孔 |
| mudhole | 除泥孔；澄泥箱 |
| muleshoe orienting device | 斜孔造斜工具 |
| multi-aperture device | 多孔磁心；多孔器件 |
| multi-aperture | 多孔的 |
| multi-holed jet | 多孔喷丝头 |
| multi-orifice valve | 多孔阀 |
| multi-pore media | 多重孔隙介质 |
| multi-tube orifice meter | 多管孔板流量计 |
| Multicellaesporifes | 无孔多孢孢属 |
| multiple in-hole motor | 组合式钻孔马达 |
| multiple pipe perforation completion | 多管射孔完井 |
| multiple-orifice valve | 多孔板阀 |
| multiple-peaked pore size distribution | 多峰状孔隙大小分布 |
| multiple-shot bullet gun | 多点射孔器 |
| Multiporopollenites | 多孔粉属 |
| multiporous fiber | 多孔纤维 |
| multishot perforation penetration performance | 多孔射孔穿透特性 |
| multishot test | 多孔射孔试验 |
| multitubular slab for cable | 多孔电缆槽 |
| NA | 数值孔径 |
| natural porosity | 原始孔隙度 |
| natural porous media | 天然多孔介质 |
| natural | 无需酸化或射孔的产油井；天然的；固有的 |
| NDPD | 中子孔隙度与密度孔隙度之差 |
| neck diameter | 孔颈直径 |
| neck meniscus | 孔颈弯月面 |
| neck radius | 孔颈半径 |
| negative perforation | 底片片孔 |
| negative pressure perforating | 负压射孔 |
| net displacement porosity | 驱动时的有效孔隙度 |
| net effective pore | 纯有效孔隙 |
| net hydrocarbon pore volume | 有效含烃孔隙体积 |
| net pore space | 有效孔隙空间 |
| net porosity | 有效孔隙度 |
| net PV | 净孔隙体积 |
| neutron log porosity | 中子测井孔隙度 |
| neutron porosity | 中子测井孔隙度 |
| NLIM | 石灰岩的中子孔隙度 |
| non-capillary porosity | 非毛细孔隙度 |
| non-carrot forming charge | 无杵体射孔弹 |
| non-carrot forming type perforator | 无杵体型射孔器 |
| non-homogeneous porous medium | 非均质多孔介质 |
| non-perforated interval | 未射孔井段 |
| non-plugging shaped charge | 无堵塞聚能射孔弹 |
| non-porous carbonate | 非孔隙性碳酸岩 |
| nonconductive pore | 不连通孔隙 |
| noninterconnected pore space | 不连通孔隙空间 |
| nonporosity | 无孔性 |
| nonporous | 无孔隙的 |
| normal pore pressure | 正常孔隙压力 |
| normal-stage punch | 正规穿孔 |
| nozzle aperture | 喷丝孔板 |
| nozzle hole | 纺丝孔 |
| nozzle opening | 纺丝孔 |
| nozzle slit | 纺丝孔 |
| NPCL | 中子孔隙度纯地层线 |
| Nullipora | 裸孔藻属 |
| number of shot per foot | 每英尺射孔数 |
| numeric punch | 数字穿孔 |
| objective aperture | 物镜孔径 |
| observation perforation | 观测孔眼 |
| observation port | 观测孔 |
| oil drain hole | 放油孔 |
| oil hole | 注油孔 |
| oil passage | 润滑油孔 |
| oil supply hole | 进油孔 |
| one trip perforating gravel pack system | 射孔与砾石充填一次起下作业装置 |
| oolitic porosity | 鲕状孔隙性 |
| open grain structure | 多孔式结构；粗晶组织 |
| open grain | 大孔隙性 |
| open hole perforator | 裸眼井射孔器 |
| open perforation | 畅通的射孔孔眼 |
| open pore | 连通孔隙 |
| open sand | 多孔隙砂岩 |
| open space filling | 孔隙充填 |
| open space | 开放孔隙 |
| open texture | 多孔结构 |
| open-cell foamed plastics | 开孔泡沫塑料 |
| open-end hole | 通孔 |
| opening of the channel | 孔道口 |
| openwork | 露天采掘；透孔织物 |
| oriented perforating | 定向射孔 |
| orifice bore | 孔板孔 |
| orifice button | 孔板塞 |
| orifice choke | 孔口节流器 |
| orifice coefficient | 孔口系数 |
| orifice constant | 孔板系数 |
| orifice control valve | 孔板节流阀 |
| orifice curve | 孔板曲线 |
| orifice differential | 孔口压差 |
| orifice discharge | 锐孔流量 |
| orifice effect | 孔眼效应 |
| orifice flange | 孔板法兰 |
| orifice flow constant | 孔板流量系数 |
| orifice flow meter | 锐孔流量计 |
| orifice flow-measurement | 孔板流量计量 |
| orifice flowmeter factor | 孔板流量计系数 |
| orifice holder | 孔板固定装置 |
| orifice meter coefficient | 孔板流量计系数 |
| orifice meter | 孔板流量计；细孔流速仪 |
| orifice plate | 孔板 |
| orifice restriction | 孔口限制 |
| orifice support tube | 孔板支管 |
| orifice tip | 孔板喷嘴端 |
| orifice viscometer | 孔口粘度计 |
| orifice well tester | 孔板式天然气流量计 |
| orifice | 口；孔；锐孔；喷嘴 |
| orifice-metering coefficient | 孔口流量系数 |
| original porosity | 原始孔隙度 |
| osteocolla | 多孔石灰华 |
| outlet aperture | 出口孔 |
| outlet hole | 出口孔 |
| outlet opening | 出口孔 |
| outside perforation packing | 射孔孔眼外砾石充填 |
| overbalance perforating | 过平衡射孔 |
| overpunching | 三行区穿孔 |
| p.u. | 孔隙度单位 |
| Pachypora | 厚孔珊瑚属 |
| pack porosity | 充填体孔隙度 |
| packperf completion system | 注水膨胀式封隔器与射孔完井系统 |
| paddle reaming bit | 翼状扩孔钻头 |
| Palaearaea | 孔壁星珊瑚属 |
| paleopore pressure | 古孔隙压力 |
| paper-tape punch | 纸带穿孔机 |
| parallel perforation | 平行射孔 |
| parallel plate pore model | 平行板孔隙模型 |
| parallel-type pore | 平行式孔隙 |
| Parasolenopora | 拟管孔藻属 |
| partial completion | 部分射孔 |
| patch jack | 接线插孔 |
| Pch | 穿孔校验 |
| peacock stone | 孔雀石 |
| pecker | 吸木鸟；替续板；穿孔器 |
| peep hole | 视孔 |
| PEH | 射孔设备接头 |
| penetrating charge | 射孔弹 |
| pennastroma | 羽层孔虫属 |
| percent pore volume | 孔隙体积百分数 |
| percentage of fractured hole | 裂孔率 |
| percentage of perforation | 穿孔率 |
| percentage of plugged hole | 堵孔率 |
| percentage of pore volume | 孔隙体积百分数 |
| perf | 射孔孔眼 |
| PERFD | 穿孔 |
| perforate | 射孔 |
| perforated caisson breakwater | 穿孔沉箱防波堤 |
| perforated carbon steel base | 带孔的碳钢中心管 |
| perforated casing | 射孔套管 |
| perforated completion | 射孔完井 |
| perforated hole | 射孔完成井 |
| perforated interval | 射孔段 |
| perforated metal tube | 带孔金属管 |
| perforated nipple | 带孔短节 |
| perforated paper tape | 穿孔纸带 |
| perforated plate | 带孔板 |
| perforated shoe | 带孔管鞋 |
| perforated sleeve stabilizer | 带孔套筒式稳定器 |
| perforated tape | 穿孔纸带 |
| perforated tunnel | 射孔孔道 |
| perforated well | 射孔井 |
| perforated zone | 射孔层段 |
| perforated | 射孔的 |
| perforated-pad stabilizer | 带孔衬套式稳定器 |
| perforated-panel layered screen | 孔板分层筛网 |
| perforating application | 射孔操作 |
| perforating charge | 射孔弹 |
| perforating damage | 射孔损害 |
| perforating debris | 射孔碎屑 |
| perforating density | 射孔密度 |
| perforating depth | 射孔深度 |
| perforating fluid | 射孔液 |
| perforating gun designation | 射孔器标记 |
| perforating gun | 射孔器 |
| perforating job | 射孔作业 |
| perforating operation | 射孔作业 |
| perforating parameter | 射孔参数 |
| perforating practice | 射孔作业 |
| perforating quality | 射孔质量 |
| perforating skin | 射孔表皮效应 |
| perforating system | 射孔装置 |
| perforating | 射孔 |
| perforation channel | 射孔孔道 |
| perforation charge | 射孔弹 |
| perforation coefficient | 射孔系数 |
| perforation completion | 射孔完井 |
| perforation debris removal | 射孔碎屑清除 |
| perforation debris | 射孔碎屑 |
| perforation density | 射孔密度 |
| perforation depth | 射孔井深 |
| perforation design | 射孔设计 |
| perforation differential | 孔眼压差 |
| perforation effectiveness | 射孔效率 |
| perforation efficiency | 射孔效率 |
| perforation friction | 射孔孔眼摩擦 |
| perforation gun | 射孔器 |
| perforation interval | 射孔段 |
| perforation job | 射孔作业 |
| perforation length | 射孔段长度 |
| perforation penetration | 射孔穿透深度 |
| perforation prepacking techniques | 射孔预充填工艺 |
| perforation size | 孔眼尺寸 |
| perforation tunnel | 射孔孔道 |
| perforation | 射孔 |
| perforation-flow efficiency | 射孔流动效率 |
| perforations adding | 补孔 |
| perforator cable | 射孔器电缆 |
| perforator coring device | 射孔取心器 |
| perforator cylinder | 射孔器管 |
| perforator orienter | 射孔器定向器 |
| perforator truck | 射孔车 |
| perforator | 射孔器 |
| peripheral vent | 周边通气孔 |
| permeability-porosity ratio | 渗透率-孔隙度比 |
| permeability-to-porosity ratio | 渗透率-孔隙度比 |
| perpendicular perforation | 垂直于裂缝面射孔 |
| PFC | 射孔-地层-接箍 |
| photometric aperture | 光度孔径 |
| piercer | 钻孔器；冲孔 |
| piercing | 钻进；钻孔 |
| pilot hole | 定位孔 |
| pinhole camera | 针孔相机 |
| pinhole diaphragm | 针孔光阑 |
| pinhole light figure | 针孔光象 |
| pinhole | 针孔；销孔；气泡；针眼 |
| pinking | 轻微爆震；穿小孔 |
| pinpoint porosity | 极小孔隙性 |
| pipe bore | 管子孔径 |
| pipe tapping machine | 管道开孔机 |
| pipeline orifice | 管道锐孔流量计 |
| piping porosity | 长形不连续气孔 |
| PIR | 孔隙度指示比 |
| Plectostroma | 绞层孔虫属 |
| plexiglass window | 有机玻璃观察孔 |
| PLL | 孔隙度下限值 |
| plug drain | 带塞头的排泄孔 |
| plug hole | 带塞的孔 |
| plugged perforation | 堵塞的射孔孔眼 |
| Pluricellaesporites | 单孔多胞孢属 |
| pocket of pore | 孔隙束 |
| pockhole | 气孔 |
| pole shoe bore | 极靴孔 |
| polished hore receptacle | 抛光孔座 |
| polyhedral pore | 多面体型孔隙 |
| Polyporina | 多孔粉属 |
| pontoon manhole | 浮船人孔 |
| poor perforation | 射孔质量不良 |
| Poraspis | 孔甲鱼属 |
| pore abundance | 孔隙发育程度 |
| pore body radius | 孔隙半径 |
| pore boundary | 孔隙边界 |
| pore bridging | 孔隙搭桥 |
| pore bulge | 孔隙扩大 |
| pore cast | 孔隙铸模 |
| pore cement | 孔隙胶结物 |
| pore channel | 孔隙通道 |
| pore character | 孔隙特征 |
| pore cluster | 孔隙簇 |
| pore compressibility | 孔隙压缩性 |
| pore configuration | 孔隙形状；孔隙结构 |
| pore connectivity | 孔隙连通性 |
| pore constriction | 孔隙喉道 |
| pore coordination number | 孔隙配位数 |
| pore cross-section | 孔隙截面 |
| pore diameter distribution | 孔径分布 |
| pore diameter | 孔隙直径 |
| pore domain | 孔隙域 |
| pore doublet model | 孔隙对模型 |
| pore entrance radius | 孔隙入口半径 |
| pore entry radius | 孔隙入口半径 |
| pore entryway | 孔隙入口 |
| pore exit | 孔隙出口 |
| pore filling | 孔隙充填 |
| pore fluid | 孔隙流体 |
| pore geometry factor | 孔隙几何因数 |
| pore geometry | 孔隙几何形状 |
| pore interconnection | 孔间通道 |
| pore length | 孔隙长度 |
| pore level flow | 孔隙内流动 |
| pore level model | 孔隙级模型 |
| pore lining | 孔壁附着 |
| pore membrane | 孔膜 |
| pore morpholohy | 孔隙形态 |
| pore network | 孔隙网络 |
| pore opening size | 孔径 |
| pore passage | 孔道 |
| pore path | 孔道 |
| pore pressure | 孔隙压力 |
| pore radius | 孔隙半径 |
| pore restriction | 孔隙收缩 |
| pore shape | 孔隙形状 |
| pore size determination | 孔隙大小测定 |
| pore size distribution | 孔隙大小分布 |
| pore sorting | 孔隙分选 |
| pore space characterization | 孔隙空间特征描述 |
| pore space | 孔隙空间 |
| pore structure | 孔隙结构 |
| pore surface | 孔隙表面 |
| pore texture | 孔隙结构 |
| pore throat | 孔喉 |
| pore tortuosity | 孔隙扭曲性 |
| pore velocity | 孔隙流速 |
| pore volume compressibility | 孔隙体积压缩系数 |
| pore volume injected | 注入的孔隙体积倍数 |
| pore volume | 孔隙体积 |
| pore waist | 孔隙收缩颈 |
| pore wall | 孔壁 |
| pore water head | 孔隙水压头 |
| pore water pressure | 孔隙水压力 |
| pore water | 孔隙水 |
| pore width | 孔隙宽度 |
| pore | 孔隙 |
| pore-aperture radius | 孔隙开口半径 |
| pore-body | 孔隙体 |
| pore-by-pore displacement efficiency | 逐孔驱替效率 |
| pore-center network | 孔隙中心网络 |
| pore-entry diameter | 孔隙入口直径 |
| pore-fluid pressure | 孔隙流体压力 |
| pore-volume-weighted pressure | 孔隙体积加权压力 |
| pore-wall curvature | 孔壁曲率 |
| pored | 有孔的 |
| Porifera | 多孔动物门；海绵动物门 |
| porigelinite | 多孔腐殖体 |
| poriness | 多孔性 |
| poroelastic medium | 多孔弹性介质 |
| porometer | 孔隙度仪 |
| poroperm characteristics | 孔渗特征 |
| poroscope | 测孔计 |
| porosimeter | 孔隙度仪 |
| porosint | 多孔材料 |
| porosity communication | 孔隙连通 |
| porosity cutoff | 孔隙度下限 |
| porosity enhancement | 孔隙度放大 |
| porosity exponent | 孔隙度指数 |
| porosity frequency distribution | 孔隙度频率分布 |
| porosity gradient | 孔隙梯度 |
| porosity isopleth map | 孔隙度等值线图 |
| porosity log | 孔隙度测井 |
| porosity overlay | 孔隙度叠合图 |
| porosity pod | 多孔性扁透镜体 |
| porosity reduction | 孔隙度下降 |
| porosity thickness | 孔隙地层厚度 |
| porosity trap | 孔隙性圈闭 |
| porosity | 孔隙度；空隙度；孔率 |
| porosity-compressibility product | 孔隙度-综合压缩系数乘积 |
| Porosphaera | 孔球轮藻属 |
| porous absorber | 多孔吸收剂 |
| porous adsorbent | 多孔吸附剂 |
| porous body | 多孔体 |
| porous cement | 孔隙胶结物 |
| porous channel | 孔道 |
| porous cup tensiometer | 多孔杯张力仪 |
| porous diaphragm device | 多孔隔膜仪 |
| porous formation | 多孔地层 |
| porous fractured medium | 孔隙裂缝性介质 |
| porous glass disk | 多孔玻璃圆盘 |
| porous ground | 多孔岩层 |
| porous hydrocarbon-bearing medium | 多孔含烃介质 |
| porous interval | 孔隙层段 |
| porous layer | 多孔岩层 |
| porous mass | 多孔物质 |
| porous medium | 多孔介质 |
| porous membrane | 多孔滤膜 |
| porous model | 多孔模型 |
| porous mold | 多孔模 |
| porous network | 多孔网络 |
| porous pay zone | 多孔产层 |
| porous plate | 多孔板 |
| porous pot | 多孔瓶 |
| porous rock | 多孔岩石 |
| porous structure | 多孔结构 |
| porous vesicular surface | 多孔表层 |
| porous walled breakwater | 多孔墙式防波堤 |
| porous water sand | 多孔含水砂层 |
| porous | 孔隙的 |
| port collar | 带孔短节 |
| ported sub | 带孔接头 |
| PORV | 孔隙体积 |
| positive-pressure perforating | 正压射孔 |
| post-depositional porosity | 沉积期后孔隙度 |
| pot resistance | 多孔瓶电阻 |
| potential porosity | 流通孔隙度 |
| PP | 孔隙压力 |
| practical porosity | 实际孔隙度 |
| pre-punch | 预先穿孔 |
| precement pore space | 胶结前孔隙空间 |
| predepositional porosity | 沉积期前孔隙度 |
| prelithifaction porosity | 岩化期前孔隙度 |
| premium-priced charge | 优质射孔弹 |
| pressure hatch | 承压入孔 |
| pressure tap | 测压孔 |
| priapolite | 多孔石灰华 |
| primary interstice | 初生孔隙 |
| primary pore | 原生孔隙 |
| primary porosity | 原生孔隙度 |
| print-punch editor | 打印穿孔编辑程序 |
| printing multiplier punch | 打印复穿孔机 |
| profile hole | 异形孔 |
| program-exit hub | 程序输出插孔 |
| program-output hub | 程序输出插孔 |
| pseudo-dead-end pore | 假封闭孔隙 |
| pumpdown perforator | 泵送射孔器 |
| punch card machine | 卡片穿孔机 |
| punch card machinery | 卡片穿孔机 |
| punch card | 穿孔卡 |
| punch format | 穿孔格式 |
| punch position | 穿孔位置 |
| punch tape storage | 穿孔带存储器 |
| punch typewriter | 打字穿孔机 |
| punch | 冲孔 |
| punched card computer | 穿孔片计算机 |
| punched card | 穿孔卡 |
| punched crad duplicating | 穿孔卡复制 |
| punched hole | 穿孔 |
| punched tape | 穿孔纸带 |
| punched-card reader | 穿孔卡读出器 |
| punched-tape code | 穿孔纸带码 |
| puncher | 冲孔机 |
| punching | 冲孔 |
| PV | 孔隙体积 |
| PVI | 注入的孔隙体积倍数 |
| rabbet | 插孔 |
| real aperture antenna | 有效孔径天线 |
| reaming pilot | 扩孔器导向部分 |
| reaming | 扩眼；铰孔 |
| receiver aperture | 接收天线孔径 |
| rejecct pocket | 废穿孔卡袋 |
| relative porosity | 相对孔隙度 |
| relief hole | 放空孔；救援井 |
| relieving device | 放空孔；救援井 |
| remaining pore water | 残留孔隙水 |
| reperforate | 补孔 |
| reperforating | 补孔 |
| reperforator | 复孔机；复凿机；收报穿孔机 |
| reproducing punch | 复穿孔机 |
| reservoir pore space | 储层孔隙空间 |
| reservoir rock opening | 储集岩孔径 |
| reshooting | 再射孔 |
| residual porosity | 残余孔隙度 |
| resin-pore cast | 树脂孔隙铸模 |
| resistivity-porosity cross plotting | 电阻率-孔隙度交绘图法 |
| restricted orifice | 扼流孔板 |
| restricted restricting orifice | 节流孔板 |
| restriction orifice | 限流孔板 |
| retrievable perforator | 可收回射孔器 |
| retrievable through-tubing perforator | 可收回过油管射孔器 |
| reverse circulation port | 反循环孔 |
| reverse-pressure perforating | 负压射孔 |
| reversing port | 反循环孔 |
| right-angle borescope | 直角闪孔镜 |
| rigid cellular foam layer | 硬质微孔泡沫层 |
| rim vent | 边缘通气孔 |
| road boring machine | 公路穿越钻孔机 |
| rock cavity | 岩石孔穴 |
| rock pore | 岩石孔孔隙 |
| rock porosity | 岩石孔隙度 |
| rodding eye | 管孔 |
| roof hatch | 罐顶量油孔 |
| roof manhole | 罐顶人孔 |
| roof manway | 罐顶人孔 |
| rounded orifice | 圆角孔板 |
| RPCP | 电阻率-孔隙度交会图 |
| rudder hole | 舵杆孔 |
| rudder port | 舵杆孔 |
| sand hole | 砂孔 |
| sand jet perforator | 水力喷砂射孔器 |
| sand porosity | 砂层孔隙度 |
| sand tester | 带筛孔油管的井下取样器 |
| sand-fill port | 充砂观察孔 |
| sandstone target | 砂岩射孔试验靶 |
| SAR | 合成孔径雷达 |
| scaled porous media model | 相似多孔介质模型 |
| scallop gun | 扇贝式射孔器 |
| scalloped hollow carrier gun | 带有凹坑的空心携弹管射孔枪 |
| scalloped retrievable gun | 扇形可回收射孔器 |
| scalloped steel carrier | 带有凹坑的钢制射孔枪枪身 |
| scattered porosity | 散射气孔 |
| screen aperture | 筛孔 |
| screen mesh | 筛孔 |
| screen number | 筛孔目数 |
| screen size | 筛孔大小 |
| screened port | 筛网孔眼；装有筛网的孔 |
| scupper plug | 排水孔的堵头 |
| scupper | 排水孔；排水管 |
| scuttle | 人孔；人孔盖；小舱口；煤斗 |
| seal bore | 密封孔 |
| secondary interstice | 次生孔隙 |
| secondary leached porosity | 次生淋滤孔隙度 |
| secondary pore system | 次生孔隙 |
| secondary pores | 次生孔隙 |
| secondary porosity index log | 次生孔隙度指数测井 |
| secondary porosity index | 次生孔隙度指数 |
| secondary porosity | 次生孔隙度 |
| sedimentary interstices | 沉积岩孔隙；沉积生成孔隙 |
| sedimentary porosity | 沉积孔隙度 |
| segmental orifice plate | 缺圆孔板 |
| selective bullet gun perforator | 选择性子弹射孔器 |
| selective perforating | 选择性射孔 |
| selectively fired gun | 选发式射孔器 |
| semi-expendable gun | 部分可回收的射孔器 |
| semipermeable porous plate | 半渗透多孔板 |
| semiporous | 半孔隙的 |
| sentinel hole | 腐蚀余量测试孔 |
| serial-type pore | 连续式孔隙 |
| shale free porosity | 无泥质孔隙度 |
| shaped charge perforator | 聚能射孔器 |
| shaped charge | 聚能射孔弹 |
| shaped-charge shooting | 聚能射孔 |
| sharp-edge orifice | 锐孔板 |
| sheetlike pores | 片状孔隙 |
| shell clearance | 扩孔器与钻头直径之差 |
| shell manhole | 罐壁人孔 |
| shell manway | 容器壁上人孔；圈板人孔 |
| shelter pore | 隐蔽孔隙 |
| shoot-and-treat sand consolidation tool | 射孔-处理联合作业的固砂工具 |
| shooting of oil well | 油井爆破作业；油井射孔 |
| shooting point | 射孔点 |
| shop-perforated pipe | 预制滤管；在工厂打孔的管子 |
| shot boring | 钢砂钻孔 |
| shot density | 射孔密度 |
| shot depth | 爆炸深度；射孔深度 |
| shot gun | 射孔器 |
| shot pattern | 射孔排列型式 |
| shot phasing | 射孔相位分布 |
| shrinkage cavity | 缩孔 |
| shrinkage porosity | 收缩孔隙 |
| side opening | 侧孔 |
| side port | 侧孔 |
| sieve opening size | 筛孔尺寸 |
| sieve opening | 筛孔 |
| sieve size | 筛分粒度；筛目尺寸；筛眼孔径 |
| sight hole | 视孔 |
| simultaneous bullet gun perforator | 联动子弹射孔器 |
| single pipe perforation completion | 单管射孔完井 |
| single-cell porosimeter | 单室孔隙度计 |
| single-perforation penetration test | 单孔射孔穿透试验 |
| single-plane jet perforator | 单面聚能射孔器 |
| single-point-entry perforating technique | 单点入口射孔技术 |
| size of mesh | 筛孔尺寸 |
| slaggy agglomerate | 多孔集块角砾岩 |
| slick boring | 灵活钻孔 |
| sliding side-door | 滑动式旁通孔 |
| sliding sleeve port | 滑动套筒上的孔 |
| slotted hole | 长圆孔 |
| slotted sleeve | 槽孔套筒 |
| slowness-porosity relationship | 慢度-孔隙度关系 |
| small diameter perforating gun | 小直径射孔器 |
| small-aperture migration | 小孔径偏移 |
| SNP | 井壁中子孔隙度测井 |
| solenopora | 管孔藻 |
| solenoporaceae | 管孔藻科 |
| solenoporian algae | 管孔藻 |
| solidly packed tunnel | 充填密实的炮眼孔道 |
| solution porosity | 溶解孔隙 |
| sonic drill | 振动钻孔机；声波钻头 |
| sonic porosity | 声波孔隙度 |
| sorting coefficient of pores | 孔隙分选系数 |
| special perforator | 专用射孔器 |
| spectacle plate | 双孔板 |
| SPF | 孔英尺 |
| sphere packing | 球粒人造多孔介质模型 |
| spherical pore segment model | 球形孔隙段模型 |
| spherical void | 球形孔隙 |
| SPI | 次生孔隙度指数 |
| spinneret orifice | 喷丝板细孔 |
| spiracle | 昆虫的呼吸孔；通气孔 |
| sponge plastics | 多孔塑料 |
| spongy | 海绵的；多孔的 |
| sprocket hole | 中导孔 |
| spud well | 桩腿通孔 |
| square-edged orifice | 直角铣孔流量计孔板 |
| square-hole cage nut | 方孔锁紧螺母 |
| square-mesh screen | 方孔筛网 |
| squeezed gun | 挤压式射孔器 |
| stagnant pore | 死孔隙 |
| standard metering orifice | 标准流量计锐孔 |
| Stephanoporopollenites | 冠孔粉属 |
| stepped bore | 级形孔 |
| STH | 侧开孔 |
| stick jet gun | 杆式聚能射孔器 |
| stochastic network pore model | 随机网络孔隙模型 |
| storage pore | 封闭孔隙 |
| storage porosity | 封闭孔隙度 |
| strap jet gun | 带状聚能射孔器 |
| Stridiporosporites | 脊肋双孔孢属 |
| strip carrier capsule gun | 钢带托架座舱式射孔器 |
| stromatoporoid limestone | 层孔虫灰岩 |
| structural porosity | 结构孔隙度 |
| Subtriporopollenites | 亚三孔粉属 |
| summary gang punch | 总计复穿孔机 |
| summary punch | 总计穿孔机 |
| summary puncher | 总计穿孔机 |
| supercapillary interstice | 超毛细孔隙 |
| supercapillary pore | 超毛细孔隙 |
| surface pore | 表面孔隙 |
| swing jet perforator | 摇杆式射孔器 |
| swing-jet gun | 悬挂式聚能射孔器 |
| Syncolporites | 合沟孔粉属 |
| synthetic aperture sonar | 合成孔径声呐 |
| synthetic aperture | 合成孔径 |
| synthetic-aperture radar | 合成孔径雷达 |
| table opening | 转盘孔径 |
| tank dip hatch | 油罐量油孔 |
| tank dip hole | 油罐量油孔 |
| tank drain | 油罐放泄孔 |
| tank float well | 储罐浮标孔 |
| tank gage hatch | 油罐量油孔 |
| tank hatch | 油罐孔口 |
| tank hood | 油罐孔盖 |
| tank manhole | 油罐人孔 |
| tap saddle | 开孔鞍形卡 |
| tape puncher | 纸带穿孔器 |
| taper wall core shell | 带内锥面的金刚石扩孔器 |
| tapered channel | 锥形孔道断面 |
| tapered ledge reamer | 锥形扩孔器 |
| tapered reamer | 锥形扩孔器 |
| taphole | 塞孔 |
| tapjack | 分支塞孔 |
| tapping and plugging machine | 打孔机 |
| tapping equipment | 开孔设备 |
| tapping machine | 穿孔机 |
| tapping point | 开孔点 |
| tapping | 开孔 |
| TCP gun | 油管传送射孔器 |
| TCP | 岩心总孔隙度 |
| telogenetic porosity | 后期形成孔隙度 |
| Tetracolporites | 四孔沟粉属 |
| tetrahedral pore | 四面体孔隙 |
| Tetrapidites | 拟四孔粉属 |
| textural porosity | 结构孔隙度 |
| thermal neutron proosity | 热中子孔隙度 |
| thermal piercing | 热力穿孔 |
| thermowell | 温度计插孔 |
| thief hatch | 罐顶取样孔 |
| thief hole | 取样孔 |
| thin porous streak | 孔隙性薄层 |
| thin section porosity | 薄片孔隙度 |
| threaded hole | 螺纹孔 |
| three porosity log | 三孔隙度测井 |
| throat port | 喉孔 |
| throat to pore ratio | 喉孔比 |
| throat to pore volume ratio | 喉道-孔隙体积比 |
| throat-to-pore coordination number | 喉道-孔隙配位数 |
| throttling orifice plate | 节流孔板 |
| through tubing gun | 过油管射孔器 |
| through tubing perforation | 过油管射孔 |
| through-tubing perforator | 过油管射孔器 |
| thrust boring machine | 顶管穿孔机 |
| Tibetipora | 西藏孔藻属 |
| tip jack | 塞孔 |
| top shot | 油层顶部射孔 |
| topology of pore network | 孔隙网络拓扑结构 |
| tornado frac gun | 旋风压裂射孔器 |
| total pore space | 总孔隙空间 |
| total porosity | 总孔隙度 |
| transfluxor magnetic core | 多孔磁心 |
| transfluxor memory | 多孔磁心存储器 |
| transfluxor | 多孔磁心 |
| transmitting aperture | 发射孔 |
| tri-porosity logging | 三孔隙度测井 |
| Tricolporopollenites | 三孔沟粉属 |
| trimodal pore size distribution | 三峰孔隙大小分布 |
| triple-porosity systems | 三重孔隙度系统 |
| triporate | 三孔的 |
| Triporicellaesporites | 三孔多胞孢属 |
| Triporopollenites | 三孔粉属 |
| Triporosa | 三孔粉组 |
| true porosity | 真孔隙度 |
| TTP | 过油管射孔 |
| tube sample boring | 取土样钻孔 |
| tubing perforator | 油管射孔器 |
| tubular pore | 管状孔隙 |
| tunnel-fill | 射孔孔道充填物 |
| two porous media | 双孔隙介质 |
| two-hole film | 双孔底片 |
| ultrajet | 高效能射孔器 |
| ultramicropore | 超微孔隙 |
| undamaged perforation | 无污染射孔 |
| underbalanced perforating | 欠平衡射孔 |
| underpunch | 下部孔；低位穿孔 |
| unicellular plastic | 单孔塑料 |
| unidirectional perforating | 单向射孔 |
| uniform intergranular porosity | 均匀粒间孔隙度 |
| unopened perforation | 堵塞的射孔孔眼 |
| unsaturated pore space | 未饱和孔隙空间 |
| unsaturated pore volume | 未饱和孔隙体积 |
| up-hole shooting | 自下而上射孔 |
| uphole | 向上钻的孔 |
| UR | 下扩孔 |
| vacuole | 空泡；液泡；析稀胶粒；气孔 |
| variable orifice | 可变孔板 |
| variable-orifice damper valve | 变孔调节阀 |
| velocity derived porosity | 声速测井确定的孔隙度 |
| velocity vs porosity relationship | 孔隙度与速度关系图 |
| vent hole | 放气孔 |
| vent | 孔 |
| ventage | 孔隙；放气 |
| vented case | 开孔弹壳 |
| verifier | 井壁取样器；检验器；核对员；穿孔校对机 |
| vermicular porosity | 蠕虫状气孔 |
| versatile perforator | 多用途射孔器 |
| vertical oriented perforation | 垂直定向射孔 |
| vesicular pore | 泡状孔 |
| vesicular | 多孔状 |
| vesicularity | 多孔度 |
| viewing port | 观察孔 |
| viewport | 观察孔 |
| virgin porous media | 原始孔隙介质 |
| visible porosity | 视孔隙度 |
| void content | 孔隙体积 |
| void index | 孔隙指数 |
| void ratio | 孔隙比 |
| volume of voids | 孔隙体积 |
| vug porosity | 溶洞孔隙度 |
| vug | 晶洞；晶簇；孔洞；岩穴 |
| vuggy formation | 多孔地层 |
| vuggy rock | 多孔岩 |
| vuggy | 多孔的 |
| vugular-solution porosity | 溶蚀孔隙度 |
| vydac | 多孔层实心球 |
| walled-burrow structure | 周壁虫孔构造 |
| water thruput pore volumes | 以地层孔隙容积为计量单位的注入水量 |
| water-filled porosity | 含水孔隙度 |
| water-swept pore channels | 水波及孔道 |
| waterflood channel | 水驱孔道 |
| wedging reamer | 锥形扩孔器 |
| weep hole | 泄水孔 |
| well index hole | 井的导孔 |
| well perforating gun | 井射孔器 |
| well perforator | 井射孔器 |
| well-cased perforating | 套管射孔 |
| wellhole blasting | 深孔爆破 |
| wet boring | 湿式钻孔 |
| wide range orifice meter | 宽量程孔板流量计 |
| wide-meshed | 粗筛孔的 |
| wimble | 锥；钻；钻孔清除器 |
| window opening | 窗口；井架未加遮挡部分；井架大门；井下套管磨开孔 |
| wireline through tubing gun | 用电缆下入的过油管射孔器 |
| wormhole porosity | 蛀虫状气孔 |
| wormhole | 条虫状气孔 |
| X-punch | 11行穿孔 |
| Y-punch | 十二行穿孔 |
| zero porosity | 零孔隙度 |
| zone of continuous porosity | 连续孔隙带 |
| Zonorapollis] | 环孔粉属 |