| abrasive jet bit | 磨料喷射钻头 |
| abrasive jets | 磨料喷嘴；喷射磨料钻头；磨料喷流 |
| ABS | 钻头截面积 |
| abutment joint | 对接接头 |
| abutting joint | 对接接头 |
| acceleration head | 加速度头 |
| accommodation bill | 空头票据 |
| acting head | 有效压头 |
| adapter substitute | 转换接头 |
| adaptor spool | 接头短管 |
| adhint | 粘合接头 |
| adjustable head Tsquare | 活头丁字尺 |
| adjustable spacer sub | 可调间隔接头 |
| adjustable union | 可调活接头 |
| Aerobit | 气体钻井用钻头 |
| AeroJet bit | 空气喷射钻头 |
| aftermost | 最后头的 |
| aiguille | 钻头 |
| air spinning cathead | 气动旋螺纹猫头 |
| AJ tubing joint | 阿特拉斯约翰逊油管接头 |
| all purpose bit | 万能钻头 |
| allgear headstock | 全齿轮床头箱 |
| AlynaSub | 阿利纳接头 |
| amphioxea | 两头尖骨针 |
| anastigmatic lens | 去象散透镜；正光镜头 |
| anchor head | 锚头 |
| anchored joint | 锚定接头 |
| angle bend | 弯头 |
| angle head | 角机头 |
| angle of yaw | 船头摆角 |
| angle plug | 弯插头 |
| annular bit | 环状钻头 |
| annulustubing crossover | 环空油管转换接头 |
| apex angle | 顶角；全面钻进金刚石钻头唇部锥度内角 |
| API connection | 美国石油学会标准接头 |
| arrow diagram | 箭头图 |
| arrow plot | 箭头图 |
| arrowhead | 箭头 |
| artesian head | 自流水压头 |
| artesian pressure head | 自流水水压头 |
| articulated joint | 活节接合；铰接接头 |
| asphalt seal | 沥青封闭层；沥青露头 |
| auger bit | 麻花钻头 |
| auger stem | 螺旋钻柱；钻头与振击器之间的钻具；钻杆 |
| augerdrill head | 螺旋钻头 |
| auto lock safety joint | 自封安全管接头 |
| automatic cathead | 自动猫头 |
| automatic gun release sub | 射孔器自动丢手接头 |
| automatic release mechanical firing head | 自动丢手机械发火头 |
| automatic sprinkler | 自动喷水淋头 |
| available head | 有效水头 |
| available pressure head | 有效水压头 |
| acropping | 向露头 |
| back bowl scraper | 导向头刮管器 |
| back off sub | 丢手接头 |
| back-to-back | 对头拼接 |
| bad checks | 空头支票 |
| ball joint clamping | 球形接头锁紧 |
| ball joint head | 球形头 |
| ball peen hammer | 圆头手锤 |
| ball-and-socket joint | 球窝接头；球形铰链连接 |
| ball-up | 泥包钻头 |
| balled bit | 泥包钻头 |
| banana jack | 香蕉插头座 |
| banana pin | 香蕉插头 |
| banana plug | 香蕉插头 |
| band head | 谱带头 |
| bar drop sub | 投杆接头 |
| bar-head | 沙坝头 |
| base elbow | 带支座弯头 |
| basket bit | 带开口朝上的取岩样筒的钻头 |
| basket head | 打捞篮头 |
| basset | 露出地面；矿层露头；露出 |
| bastard connection | 不合格的螺纹；有一扣不合格的接头 |
| bay head barrier | 湾头障壁坝 |
| bay head delta | 湾头三角洲 |
| bayhead bar | 湾头坝 |
| bayhead beach | 湾头滩 |
| beach platform | 滩头浪蚀台地 |
| beach-head | 滩头 |
| beak | 鸟嘴；钩形鼻；柱的尖头 |
| beam head | 游梁头 |
| beam rating | 驴头负荷 |
| begin-of-tape | 带头标志 |
| bell and flange reducer | 承口法兰大小头 |
| bell and spigot bend | 承插式弯头 |
| bell and spigot joint | 套口连接；套接头；套筒接合 |
| belt lacing | 皮带接头 |
| belted outcrop plain | 条带状露头平原 |
| bend | 弯曲；月弯头；可曲波导管；屈从；集中全力；河曲 |
| bending iron | 弯钢筋搬头 |
| bending sub | 弯接头 |
| bending | 弯曲；挠曲；配曲调整；偏移；折曲；无线电波束曲折；弯头 |
| bent spanner | 弯头扳手 |
| bent sub | 弯接头 |
| bent | 爱好；排架；横向构架；弯头；弯的；决心的 |
| BHHP | 钻头水马力 |
| bi-telephone | 头戴双耳耳机 |
| bicamera | 双镜头摄影机 |
| bicenter bit | 双中心钻头 |
| big end bearing shell | 连杆大头轴瓦 |
| big end | 大端；连杆的曲柄头 |
| big-eyed bit | 大喷嘴造斜钻头 |
| big-stone bit | 大粒金刚石钻头 |
| bit adapter | 钻头接头 |
| bit and mud socket | 钻头及泥浆吸取筒 |
| bit balling | 钻头泥包 |
| bit blank | 钻头坯体 |
| bit body | 钻头体 |
| Bit Boss | 套筒式钻头导向工具 |
| bit bounce | 钻头跳动 |
| bit box | 井场用钻头盒 |
| bit break-in procedure | 钻头试钻过程 |
| bit breakage | 钻头损坏 |
| bit breaker | 钻头装卸器 |
| bit capability number | 钻头能力数 |
| bit change | 换钻头 |
| bit clearance | 井壁与钻头的间隙 |
| bit cone | 钻头牙轮 |
| bit constant | 钻头常数 |
| bit consumption | 钻头消耗量 |
| bit contour | 钻头外形 |
| bit cost | 钻头费用 |
| bit count | 钻头上金刚石数量 |
| bit course | 钻头轨迹 |
| bit crown | 金刚石取心钻头冠部 |
| bit cutting angle | 钻头切削角 |
| bit deflection | 钻头偏斜 |
| bit die | 钻头制造压模 |
| bit dresser | 钻头修整器；钻头修整工 |
| bit dressing | 修整钻头 |
| bit drive shaft | 钻头驱动轴 |
| bit edge | 钻头刃 |
| bit face | 钻头端面 |
| bit factor | 钻头因素 |
| bit feed | 钻头给进 |
| bit feeding mechanism | 钻头给进机构 |
| bit footage | 钻头进尺数 |
| bit frame | 钻头体 |
| bit front aggressivity | 钻头纵向切削 |
| bit gage | 钻头规 |
| bit geometry | 钻头几何形状 |
| bit grading | 钻头磨损等级 |
| bit guide | 钻头导向器 |
| bit heading | 钻头指向 |
| bit HHP | 钻头水马力 |
| bit holder | 钻头夹持器 |
| bit hustler | 废钻头收集者 |
| bit hydraulic calculator | 钻头水力计算器 |
| bit hydraulic horsepower | 钻头水马力 |
| bit hydraulics | 钻头水力特性 |
| bit inclination force | 钻头偏斜力 |
| bit inclination | 钻头倾斜 |
| bit insert | 钻头镶嵌块 |
| bit jamming | 钻头卡住 |
| bit lateral aggressivity | 钻头侧向切削 |
| bit leg | 牙轮钻头巴掌 |
| bit life | 钻头寿命 |
| bit matrix | 钻头基体 |
| bit nozzle | 钻头喷嘴 |
| bit penetration | 钻头吃入深度；钻头进尺速度 |
| bit performance | 钻头工作情况 |
| bit pilot | 钻头导向器 |
| bit port | 钻头水眼 |
| bit pressure drop | 钻头压力降 |
| bit pressure | 钻头压力 |
| bit program | 钻头方案 |
| bit prong | 钻头牙轮齿 |
| bit protector | 钻头保护器 |
| bit puller | 钻头拧卸器 |
| bit rams | 钻头整形锤 |
| bit reaction force | 钻头反作用力 |
| bit records | 钻头记录 |
| bit recovering tap | 打捞钻头的公锥 |
| bit ring | 量钻头外径的圆环 |
| bit run | 钻头行程 |
| bit shank | 钻头的丝扣部分 |
| bit sharpener | 钻头修整机；截齿修整机；锻钎机 |
| bit side cutting action | 钻头侧向切削作用 |
| bit side force | 钻头侧向力 |
| bit size | 钻头尺寸 |
| bit skew | 钻头偏转量 |
| bit slug | 钻头镶嵌块 |
| bit stabilization techniques | 钻头稳定技术 |
| bit standoff | 钻头支距 |
| bit sub | 钻头短接 |
| bit supplier | 钻头供应公司 |
| bit teeth | 钻头齿 |
| bit tilt mechanism | 钻头倾斜机理 |
| bit tilt | 钻头倾斜 |
| bit track | 钻头轨迹 |
| bit trajectory behavior | 钻头轨迹特性 |
| bit trajectory | 钻头轨迹 |
| bit trips | 为更换钻头而进行起下钻作业 |
| bit type selection | 钻头选型 |
| bit walk tendency | 钻头游动趋势 |
| bit walk | 钻头的侧移 |
| bit wear | 钻头磨损 |
| bit wing | 刮刀钻头的刮刀片 |
| bit with extended nozzles | 下水眼钻头 |
| bit's directional cutting ability | 钻头的定向切削能力 |
| bit-tooth dullness | 钻头牙齿磨钝度 |
| Bitop | 美Amoco公司所用优选钻井参数的钻头工作程序 |
| BITROP | 钻头钻穿速率 |
| blade bit | 刮刀钻头 |
| blank area | 接头部分 |
| blank bit | 钻头坯体 |
| blank bits | 金刚石钻头胎体 |
| blank-casing bit | 套管底部装用的环状钻头坯 |
| blast joint | 耐磨接头 |
| blind apex | 隐伏露头 |
| blunt bit | 钝钻头 |
| boartz | 钻头用的金刚石粒 |
| boat landing | 船码头 |
| bobbin tailing | 筒子或管纱留头 |
| body of the bit | 钻头体 |
| boil-weebil tubing head | 易于联在井口中的油管头 |
| boiler head | 锅炉头部 |
| boll-weevil tubing head | 易装的油管头 |
| bolt with one end bent back | 弯头螺栓 |
| bolted pipe coupling | 螺栓连接的管接头 |
| boot sub | 靴形接头 |
| bore bit | 钻头 |
| boring bit | 钻孔钻头 |
| boring head | 钻具的切削头 |
| bort bit | 不纯金刚石钻头 |
| bort-set bit | 细粒金刚石钻头 |
| borway bit | 齿状取心钻头 |
| boss | 工头 |
| bottom gear | 头档 |
| bottom hole bit locator | 井底钻头定位器 |
| bottom hole orientation sub | 井下定向接头 |
| bottom sub | 堵头 |
| bowl-gudgeon | 木质绞车轴头 |
| box eye bolt | 环头螺栓 |
| box to pin | 公母接头 |
| box tong space | 母接头上打大钳处 |
| box type bit | 母接头的钻头 |
| box up and pin down | 上部阴螺纹-下部阳螺纹接头 |
| box-box connection | 双母螺纹接头 |
| box-thread bit | 内螺纹钻头 |
| bracing the bit | 钻头加固 |
| brad | 曲头钉 |
| bradding | 牙轮钻头齿撞碎裂或弯卷 |
| bradenhead squeeze job | 通过套管头挤水泥作业 |
| braistorming | 头脑风暴法 |
| brale | 金刚石锥头 |
| brass adapter | 黄铜接头 |
| break-and-make cathead | 自动猫头 |
| break-off plug type circulating sub | 断塞式循环接头 |
| breakout cathead | 卸松螺纹猫头 |
| breakout plate | 钻头装卸器 |
| breakwater end | 防波堤堤头 |
| breakwater gap | 防波堤缺口；堤头口门 |
| breakwater tip | 防波堤堤头 |
| bridge of the bit | 四牙轮钻头牙轮支架 |
| broach | 锥形尖头工具 |
| BS | 钻头尺寸 |
| BT | 弯头 |
| BTFT | 现时钻头进尺 |
| bubble head | 显示头 |
| bucking the tool joint | 给钻杆装接头 |
| bulkhead wharf | 岸壁型码头 |
| bull nose guide | 圆头导向器 |
| bull nose screw | 圆头螺钉 |
| bull point | 尖钻头 |
| bull-nose plane | 牛头刨 |
| bull-plugged tee | 带堵头的三通 |
| bullet connector | 插塞接头 |
| bullnose | 圆头引导器；定位塞；外圆角；丝堵；圆头管堵 |
| bump joint | 凸缘接头 |
| bumper safety joint | 震击器安全接头 |
| buoyant stinger | 浮力插头 |
| bur | 旋转钻头 |
| burner tip | 燃烧器喷头 |
| burnt bit | 烧坏的钻头 |
| buster | 庞然大物；犁；炸弹；钉头切断机；风镐 |
| butt junction | 对接头 |
| butt plate splice | 钢板对头拼接 |
| Butterworth head | 机械洗舱管头 |
| button bit | 镶齿钻头 |
| button head bolt | 圆头螺栓 |
| button head screw | 圆头螺钉 |
| cable bit | 绳式顿钻钻头 |
| cable bond | 电缆接头 |
| cable input plug | 电缆输入接头 |
| cable joint | 电缆接头 |
| cable pack-off | 电缆头密封 |
| cable splice | 电缆接头 |
| cable tool bit | 顿钻钻头 |
| cable tool joint | 顿钻接头 |
| cablehead end | 电缆头终端 |
| cablehead | 电缆头 |
| Cacops | 巨头螈属 |
| cage adapter | 外壳连接器；深井泵罩的接头 |
| calibration-sub | 校正接头 |
| can | 罐头；金属容器 |
| canning | 罐头食品的制造；油封 |
| cannon plug | 圆柱形插头 |
| capacitive plug | 电容插头 |
| capacity-head curve | 排量-压头曲线 |
| Capitosaurus | 大头螈属 |
| carbide bit | 硬质合金钻头 |
| carbide insert bit | 镶硬合金齿的牙轮钻头 |
| carbide type bit | 镶硬合金齿的牙轮钻头 |
| carbide-tipped drill | 硬质合金钻头 |
| carbonado bit | 黑金刚石钻头 |
| cardan joint | 卡登接头 |
| cardan spider | 万向十字型接头 |
| cartridge | 夹头 |
| case adapter | 套管异型接头 |
| casing adapter | 套管异径接头 |
| casing head bowl | 套管头内卡瓦座圈 |
| casing sub | 套管异径接头 |
| casing substitute | 套管异径接头 |
| casing swivel | 套管旋转头 |
| casinghead gas | 套管头天然气 |
| casinghead pressure | 套管头压力 |
| casinghead spool | 套管头四通 |
| casinghead squeeze | 套管头挤水泥 |
| casinghead top | 套管头顶 |
| casinghead | 套管头 |
| cast bit | 孕镶式金刚石钻头 |
| cast matrix | 钻头铸嵌基体 |
| cast-insert bit | 铸嵌式金刚石钻头 |
| cat hook | 猫头绳小钩 |
| cat shaft | 猫头轴 |
| catalyst bed skimming | 催化剂床层撇头 |
| catcher sub | 捕捉接头 |
| cathead | 猫头；管子坠；用猫头起重；吊锚架 |
| catline grip | 猫头绳爪 |
| catline guard | 猫头绳防护罩 |
| catline guide | 猫头绳导向器 |
| catline | 猫头绳 |
| cellular type quay | 分区式码头 |
| cement casing head | 水泥头 |
| cement guide nose | 水泥制引鞋圆头 |
| cement head | 水泥头 |
| cemented carbide bit | 硬质合金钻头 |
| cementing casing head | 水泥头 |
| cementing head | 水泥头 |
| center bit | 中心钻头 |
| center coupling | 中间接头 |
| center sub | 中心接头 |
| center tap | 中心抽头 |
| center-hole bit | 带中心水眼的钻头 |
| centralizer sub | 扶正器接头 |
| centre-jet drill bit | 中心喷射式钻头 |
| centre-tapped | 中心抽头的 |
| CFS | 连续流量计探头 |
| CG | 照相机镜头 |
| CH | 电缆头 |
| chain bit | 链式钻头 |
| change-over sub | 大小头 |
| chape | 线头焊片 |
| chapiter | 柱头 |
| cheese head screw | 圆头螺钉 |
| chert bit | 钻硅质石灰岩用的钻头 |
| CHF | 套管头法兰 |
| chicksan | 高压旋转接头 |
| chipping type bit | 切削型钻头 |
| chisel type insert bit | 楔形硬合金齿钻头 |
| choke plug | 塞头 |
| chuck | 夹头 |
| churn-drill bit | 冲击钻头 |
| circular index | 圆分度头 |
| circulating head | 循环冲洗管头 |
| circulation control joint | 可控循环接头 |
| circumferential microsonic sonde | 环行微声波测井探头 |
| clamp sub | 夹头 |
| clamping chuck | 夹头 |
| clean-out bit | 清除井底钻头 |
| clink bolt | 弯头螺栓 |
| close return bend | 回弯头 |
| closed annular outcrop | 封闭环形露头 |
| clutch joint | 离合接头 |
| CMS | 井周微声波测井仪探头 |
| coach bolt | 方头螺栓 |
| coarse-threaded joint | 粗纹接头 |
| coax plug | 同轴插头 |
| cock | 旋塞；小龙头；扳机 |
| cold elbow | 冷弯弯头 |
| collapsible bit | 伸缩式钻头 |
| collar pipe | 接头前后错开方式排放管子 |
| collet chuck | 弹簧夹头 |
| collet lock | 弹性夹头锁紧装置 |
| collet | 夹头 |
| combination coupling | 组合接头 |
| combination head | 组合头 |
| combination sub | 组合接头 |
| compensator protector | 钻头压力补偿器的保护杯 |
| concave bit | 凹面钻头 |
| concave inward bit | 中心凹陷形钻头 |
| concealed outcrop | 隐蔽露头 |
| conductor housing | 导管头 |
| conduit joint | 接头 |
| cone backface | 钻头牙轮底平面 |
| cone bit design layout | 牙轮钻头啮合图 |
| cone bit | 牙轮钻头 |
| cone rock bit | 锥形牙轮钻头 |
| cone type roller bearing rock bit | 滚柱轴承锥形牙轮钻头 |
| cone-jet mixer | 漏头射流式搅拌器 |
| conehead | 锥头 |
| connecting reducer | 异径接头 |
| connection number | 接头号码 |
| constant head | 常水头 |
| constant hydrostatic head device | 静水头调节装置 |
| construction bend | 现制弯头 |
| contact probe | 探头 |
| contact sonde | 接触探头 |
| container wharf | 集装箱码头 |
| continuous chain bit | 连续链式钻头 |
| continuous head plug container | 连续式水泥头 |
| control casing head | 带阀的套管头 |
| conventional bit | 常规钻头 |
| core bit wing | 刮刀取心钻头的刀翼 |
| core bit | 取心钻头 |
| core cone bit | 牙轮取心钻头 |
| core drilling bit | 取心钻头 |
| core head | 取心钻头 |
| core-barrel bit | 硬砂岩钻头 |
| core-bit tap | 打捞金刚石取心钻头的公锥 |
| coring bit | 取心钻头 |
| coring crown | 取心钻头 |
| corncob bit | 金刚石锥形钻头 |
| corner joint | 弯管接头 |
| corrugated elbow | 皱褶弯头 |
| counter nut | 埋头螺母 |
| countersunk bolt | 埋头螺栓 |
| countersunk nut | 埋头螺母 |
| countersunk rivet | 埋头铆钉 |
| countersunk screw | 埋头螺钉 |
| countersunk | 埋头孔 |
| coupling bend | 弯管接头 |
| coupling gasket | 接头垫片 |
| cove beach | 湾头滩 |
| cracker | 破碎机；裂化装置；顿钻中钢丝绳与钻头间加的一段30米长棕绳；定向钻井中为了造斜或减斜在钻头与钻铤间加一段较细的钻杆 |
| crank bore | 曲柄连杆大头的孔 |
| cross bit | 十字形钻头 |
| cross pin type joint | 万向节头 |
| cross roller rock bit | 十字形四牙轮钻头 |
| cross tee | 四通接头 |
| cross-bladed chisel bit | 十字刮刀楔形齿钻头 |
| cross-chopping bit | 十字冲击钻头 |
| cross-over joint | 交叉接头 |
| cross-over shoe | 转向接头；交叉液流汇合装置 |
| cross-section cone bit | 四牙轮钻头 |
| crosshead beam | 十字头联杆 |
| crosshead die | 直角机头模 |
| crosshead guide | 十字头导板 |
| crosshead inspection plate | 十字头视孔盖 |
| crosshead oil plug | 十字头润滑油塞 |
| crosshead oil tray | 十字头油槽 |
| crosshead pin bushing | 十字头销圈 |
| crosshead pin | 十字头销 |
| crosshead retainer | 十字头护圈 |
| crosshead shoe | 十字头闸瓦 |
| crosshead | 十字头 |
| crossover coupling | 转换接头 |
| crossover sub | 过渡接头 |
| crowfoot bar | 带拔钉子叉头的大撬杠 |
| crown for chilled shot | 研钢砂钻头 |
| crown profile | 钻头冠的外形 |
| crowned bit | 阶梯式钻头 |
| cruci- | 【词头 |
| crybaby | 需上油的接头 |
| CSK SCREW | 埋头螺钉 |
| CT | 中间抽头 |
| cul-de-sac | 尽头路 |
| cup head bolt | 半圆头螺栓 |
| cup head rivet | 半圆头铆钉 |
| curf | 取心钻井的环状井底；金刚石取心钻头切削环；取心钻头切削面 |
| cushion sub | 缓冲器接头 |
| cuspate bar | 尖头沙坝 |
| cuspate delta | 尖头三角洲 |
| cuspate reef | 尖头岩礁 |
| cuspate sandkey | 尖头小沙岛 |
| cuspate spit | 尖头沙嘴 |
| cutter shell | 钻头牙轮体 |
| cutting head | 取心钻头切削刃 |
| cutting the head of contamination | 切割混油头 |
| d-c erasing head | 直流消磁头 |
| DBIT | 金刚石钻头 |
| DCB | 金刚石取心钻头 |
| dead end | 封闭或堵塞端；死端；尽头 |
| deadhead | 铸件冒头 |
| deep water wharf | 深水码头 |
| deflecting bit | 造斜钻头 |
| deflection bit | 造斜钻头 |
| deflection of the bit | 钻头偏斜 |
| delivery head lift | 输送压头 |
| delivery head | 输送压头 |
| demountable bit | 可拆散式钻头 |
| design head | 设计水头 |
| detachable bit | 可拆开的钻头 |
| detachable drill head | 可拆卸钻头 |
| detached wharf | 岛式码头 |
| detecting head | 探测头 |
| detector | 探头 |
| deviation bit | 偏心钻头 |
| diaborit | 孕镶式钻头 |
| diamod-enhanced hammer bit | 金刚石镶齿震击钻头 |
| diamond bit | 金刚石钻头 |
| diamond compact bit | 金刚石复合片钻头 |
| diamond content | 钻头上金刚石的克拉数 |
| diamond core bit | 金刚石取心钻头 |
| diamond drill bit matrix | 金刚石钻头胎体 |
| diamond drill bit | 金刚石钻头 |
| diamond head | 金刚石钻头 |
| diamond pattern | 钻头金刚石颗粒的排列型式 |
| diamond point bit | 尖头钻头 |
| diamond shear bit | 金刚石剪切钻头 |
| diamond-impregnated bit | 孕镶金刚石钻头 |
| diamond-particle bit | 潜铸型细粒金刚石钻头 |
| diamond-set bit | 表镶金刚石钻头 |
| diamy | 表镶金刚石钻头 |
| die coupling | 打捞接头 |
| die head | 板牙头 |
| differential bit | 差动式钻头 |
| differential head | 差异压头 |
| dig in | 掘进；插入；钻头切入岩层 |
| digging teeth | 钻头齿 |
| dip-arrow map | 倾角箭头图 |
| direct recording head | 直接记录头 |
| directional bit side force component | 定向钻头侧向分力 |
| directional bit | 定向钻头 |
| directional sub | 定向接头 |
| directional-type tricone bit | 定向型三牙轮钻头 |
| discharge cock | 泄放旋塞；泄水龙头 |
| discharge head | 压头；扬程 |
| discharge jetty | 卸货码头；卸油桥台 |
| discharge pressure head | 排出压头 |
| disk bit | 盘形钻头 |
| disk landing zone | 磁盘磁头着盘区 |
| dividing head | 分度头 |
| DM bit | 带蹼牙轮钻头 |
| dock charge | 码头费 |
| dock price | 码头价 |
| dock quay | 临坞岸壁；码头 |
| dock wharf | 港池码头 |
| dock | 码头 |
| dock-line system | 码头选择系统 |
| dockage | 码头费 |
| doctorate | 博士头衔 |
| dog | 狗；轧头；挡块 |
| doghouse | 高频高压电源屏蔽罩；调谐箱；炉头喷气口；原料预热室；仪器车；移动式井场值班房 |
| dolly | 铆顶；钉头型；捣棒；辘车 |
| dolphin type wharf | 系缆桩式码头 |
| dormant screw | 埋头螺钉 |
| double bend | 双弯头 |
| double box collar | 双母接头钻铤 |
| double cap casing head | 双顶套管头 |
| double passage swivel joint | 双通回转接头 |
| double pin sub | 两头阳螺纹接头 |
| double pin sucker rod | 两头阳螺纹的抽油杆 |
| double spinning head | 双丝束纺丝头 |
| double taper bit | 两层镶嵌刃取心钻头 |
| double thread | 双头螺纹 |
| double-cone bit | 双牙轮钻头 |
| double-end | 双头的 |
| double-ended boiler | 双头锅炉 |
| double-ended spanner | 双头扳手 |
| double-ended wrench | 双头扳手 |
| double-pin connection | 双头阳螺纹接头 |
| double-studded flange | 双头螺栓连接的法兰 |
| double-tilted navigation sub | 双弯度导向接头 |
| dovetail | 燕尾榫；燕尾接头；用燕尾榫接合；把…制成鸠尾榫；吻合 |
| dowel screw | 双头螺钉 |
| downhole controllable-angle bent sub | 井下可控弯接头 |
| downhole hammer bit | 井下震击钻头 |
| Dr. | 刮刀钻头 |
| drag bit | 刮刀钻头 |
| drag rotary detachable bit | 拆卸式刮刀钻头 |
| drag shoe | 研钢砂钻头；磨鞋；闸瓦 |
| drag type bit | 刮刀钻头 |
| draught loss | 压头损失 |
| drawhead | 拉拔机机头 |
| drawing head | 牵引头 |
| dress bit | 修整套管柱用钻头 |
| dresser coupling | 一种为联接平头管子用的带盘根套筒 |
| dressing bit tongs | 修整钻头用的钳子 |
| dressing machine | 钻头修整机；选矿机 |
| drifter | 架式矿机；漂流物；漂流水雷；冲头；穿孔器 |
| drill bit run | 钻头行程 |
| drill bit | 钻头 |
| drill edge | 钻头切削刃 |
| drill feed | 钻头给进 |
| drill free | 钻头空转 |
| drill gauge | 钻头直径量规 |
| drill head | 自动钻井水龙头 |
| drill pipe box and pin | 钻杆公母接头 |
| drill pipe sub | 钻杆接头 |
| drill studs | 钻头镶嵌物 |
| drill thrust | 钻头轴向压力 |
| drilling bit | 钻头 |
| drilling head | 钻头 |
| drilling thrust | 钻压；钻头的轴向载荷 |
| drilling tool substitute | 钻具接头 |
| drive bit | 击入式钻头 |
| drive pipe head | 击入管撞击头 |
| drive-on lead seal adapter | 压合式铅封接头 |
| driver over adapter | 压入接头 |
| drogue | 浮锚；浮标；锥形风标；漏斗形接头；拖靶 |
| DSS tubing joint | 双密封专用油管接头 |
| DTU | 双斜U形接头 |
| dual horsehead unit | 双驴头装置 |
| dual-axis universal joint | 双轴万向接头 |
| dual-head meter | 双头流量计 |
| duck | 鸭；有吸引力的物；突然的一潜；闪避；细帆布；突然潜入水中；迅速低下头；闪避 |
| dull bit indicator | 钻头磨损指示器 |
| dull bit | 钝钻头 |
| dulled bit | 磨钝钻头 |
| duo-twist system | 双头假捻体系(两根复丝合并后经假捻定形 |
| duo-twist texturing | 双头假捻变形工艺 |
| dutchman | 夹在一对法兰中的垫片；留在接箍中的废管子头；螺孔中的断头螺丝 |
| dynamic head | 动压头 |
| E-H tee | 超高频T形接头 |
| earphone unit | 头带受话机 |
| easing the bit in | 钻头轻压慢转钻进地层 |
| Easto circulating sub | 伊士托循环接头 |
| eccentric bit | 偏心钻头 |
| eccentric reducer | 偏心大小头 |
| eccentric underreaming bit | 管下扩眼偏心钻头 |
| economill | 轻便钻头 |
| edge connector | 插头座 |
| edge joint | 边缘连接；卷边接头；边缘焊接头 |
| effective head | 有效压头 |
| effective pressure head | 有效压头 |
| eggbeater PDC bit | 打蛋器型PDC钻头 |
| elbow connection | 弯接头 |
| elbow joint | 肘节；肘接头 |
| elbow lug | 弯头吊耳 |
| elbow piece | 弯头 |
| elbow union | 弯头活接头 |
| electric connection | 电接头 |
| electric swivel | 电动水龙头 |
| electro-swivel | 电动旋转接头 |
| elevation head | 高程水头 |
| end-to-end control | 头尾控制 |
| endless tubing | 无接头油管 |
| endo | 用端部滑行；把管子头对头地排放；人搬管子时唱的号子 |
| endoradiosonde | 体内无线电探头 |
| energy head | 能头 |
| equalizing sub | 平衡接头 |
| erase head | 抹音头 |
| erasing head | 消磁头 |
| erosion sand probe | 砂粒冲蚀探头 |
| escarpment | 悬崖；陡坡；马头丘 |
| ex quay | 码头完税价 |
| ex quey | 码头交货 |
| ex wharf | 目的港码头交货价 |
| excentric bit | 偏心钻头 |
| excess fluid head | 过剩流体压头 |
| expansion bit | 伸缩钻头 |
| expansion joint | 伸缩接头 |
| expier price | 码头交货价 |
| export pier | 出口码头 |
| exposure | 暴露；曝光；陈列；露头；出刃 |
| extended gauge bit | 加长保径的钻头 |
| extended-nozzle bit | 加长喷嘴钻头 |
| extension sub | 延伸接头 |
| extra-long near-bit stabilizer | 超长近钻头稳定器 |
| extractor sub | 抽取器接头 |
| extreme line joint | 管端成平坦线接头 |
| extrusion nozzle | 喷丝头；喷嘴；喷丝板 |
| face-to-face | 面对面；弯头接口面到面尺寸 |
| factory pipe bend | 预制弯头 |
| falling head permeameter | 变水头渗透率仪 |
| false cropping | 假露头 |
| FAQ | 码头交货 |
| farm boss | 产油矿区经理；采油监督人；工长；工头 |
| fault outcrop | 断层露头 |
| FBS | 全井眼流量计探头 |
| feed control | 进料控制；控制钻头给进；钻头加压控制 |
| feed of drill | 钻头给进 |
| feed range | 钻头进尺数 |
| feed-through connector | 直通插头 |
| feedback tap | 反馈抽头 |
| feeder head | 给进头 |
| female connection | 阴螺纹接头 |
| female ell | 阴螺纹弯头 |
| female end of pipe | 管子承头 |
| female union | 活接头扣圈 |
| female-male reducer | 两端分别带有内外螺纹的大小头 |
| ferry berth | 渡船码头 |
| FH | 贯眼式接头 |
| field elbow | 工地制造的弯头 |
| FIL HD | 有槽圆头螺钉 |
| file header label | 文件头标号 |
| fill nipple | 注入接头 |
| filling connection | 装油接头 |
| filling ramp | 装油码头 |
| fillister head screw | 有槽圆头螺钉 |
| finger bit | 刮刀钻头 |
| finger pier | 指形突码头 |
| firing head | 发火头 |
| fish joint | 打捞接头；夹板接合 |
| fishing head | 打捞头 |
| fishing swage | 打捞器异径接头 |
| fishtail bit | 鱼尾钻头 |
| fixed cutter bit | 固定切削刃钻头 |
| fixed head magnetic drum | 固定头磁鼓 |
| fixed head | 固定头 |
| fixed-head disk | 定头盘 |
| fixture splice | 固定接头 |
| flash weld tool joint | 闪光焊钻杆接头 |
| flat head rivet | 平头铆钉 |
| flat head screw | 平头螺钉 |
| flat toothed bit | 平底牙轮钻头 |
| flat-ended horizontal cylindrical tank | 卧式平头圆筒形罐 |
| flathead | 扁平头 |
| flatter face bit | 平底钻头 |
| flexible bend | 软弯头 |
| floating head heat exchanger | 浮头换热器 |
| floating head magnetic drum | 浮动头磁鼓 |
| floating head vent | 浮头排出管 |
| floating head | 浮头；浮盖 |
| floating landing stage | 浮码头 |
| floating magnetic head | 浮动磁头 |
| floating terminal | 浮动码头 |
| floating tube sheet | 浮头管板 |
| floating type wharf | 浮式码头 |
| flow cross | T 型压力接头 |
| flow fitting | T 型接头 |
| flow sub | 引流接头 |
| flowline swivel | 出油管旋转接头 |
| FLT.HD. | 平头螺钉 |
| fluid head loss | 液体压头损失 |
| fluid head | 流体压头 |
| fluid swivel | 液压旋转头 |
| flush bolt | 埋头螺栓 |
| flush joint liner | 无接箍平口接头衬管 |
| flush joint | 平式接头 |
| flush weld tool joint | 闪光对焊接头 |
| fluted sub | 带槽接头 |
| flux-sensitive head | 通量磁头 |
| flying head | 浮动磁头 |
| foam-water spray head | 泡沫-水两用喷头 |
| foam-water sprinkler | 泡沫-水两用喷淋头 |
| focusing probe | 聚焦探头 |
| follower head | 后端头 |
| footage per bit | 每个钻头进尺 |
| formation-bit force | 地层-钻头力 |
| forward andor aft | 船头和船尾 |
| four point bit | 十字形钻头 |
| four roller bit | 四牙轮钻头 |
| four-hanger housing | 可容四悬挂器的井口头 |
| four-lens camera | 四镜头摄影机 |
| four-pin plug | 四脚插头 |
| four-way bit | 四翼刮刀钻头 |
| four-way connection | 四通接头 |
| four-way drag bit | 四翼刮刀钻头 |
| four-way union | 十字接头 |
| four-wing bit | 四翼刮刀钻头 |
| four-wing pattern bit | 四翼钻头 |
| frame of the bit | 钻头体 |
| free at quay | 码头交货 |
| free head | 自由水头 |
| fresh bit | 新修复的钻头 |
| fresh exposure | 新鲜露头 |
| friction head | 摩擦水头 |
| front end octane | 馏分头部辛烷值 |
| front end | 前端；高频端；馏分头部 |
| frustum | 截头锥体 |
| FTG | 接头配件 |
| full gauge bit | 全径钻头 |
| full gauge deflecting bit | 全径造斜钻头 |
| full hole joint | 贯眼接头 |
| full hole tool joint | 贯眼式接头 |
| full-scale bit | 足尺寸钻头 |
| gad | 錾；尖头杆；测杆 |
| gamma-ray probe | 伽马探头 |
| gas head | 气体压头 |
| gauge edge | 刮刀钻头外缘刃 |
| gauge of bit | 钻头规格直径 |
| geneva cross | 十字形接头 |
| geophysical jetting bit | 钻地震井用的喷射钻头 |
| germanium cryosonde | 锗低温探头 |
| gib-head key | 带凸头的键 |
| gib-head taper key | 圆头锥形键 |
| gimbal joint | 万向接头 |
| GMS | 压差密度计探头 |
| gompholite | 钉头砾岩 |
| GP shear-out safety joint | 砾石充填剪切安全接头 |
| gradiomanometer sonde | 压差密度计探头 |
| grass crop | 露头 |
| gravity head | 静压头 |
| gravity type wharf | 重力式码头 |
| green bit | 新钻头 |
| grip head | 夹头 |
| grip holder | 夹头 |
| gripping head | 夹头 |
| ground glass joint | 磨口玻璃接头 |
| grub screw | 无头螺钉 |
| guide bit | 导向钻头 |
| guide sub | 导向接头 |
| gumbo bit | 钻粘泥层用的钻头 |
| gun release sub | 射孔器松开接头 |
| H | 压头 |
| H. | 水头 |
| hammer operated bit | 震击钻钻头 |
| hand tight | 用手上紧的；手紧螺纹管接头 |
| hand wharf crane | 手摇码头起重机 |
| hander | 支持器；夹头 |
| handling sub | 控制接头 |
| handshake agreement | 口头协议 |
| harbor barge | 码头驳船 |
| hard banding of tool joint | 钻杆接头表面加硬圈 |
| hard faced bit | 敷焊硬合金钻头；表面硬化的钻头 |
| hard facing of tool joint | 钻杆接头表面加硬层 |
| hard formation cutting head | 硬地层钻头 |
| hard metal core bit | 硬质合金取心钻头 |
| hardened coupling | 淬硬接头 |
| head capacity curve | 压头-排量曲线 |
| head check pulse | 磁头检验脉冲 |
| head cover | 磁头盖 |
| head crash | 磁头碰撞 |
| head loss | 压头损失 |
| head measurement tube | 压头测量管 |
| head meter | 压头指示仪 |
| head of delivery | 压头 |
| head of nozzle | 喷嘴头 |
| head of tender | 油头 |
| head of water | 水头 |
| head on pump | 泵压头 |
| head pressure | 压头 |
| head section of breakwater | 防波堤头断面 |
| head sub | 接头短节 |
| head voltage | 电缆头电压 |
| head | 头 |
| head-capacity curve | 压头-扬量曲线 |
| head-to-head polymer | 头-头聚合物 |
| head-to-tail polymer | 头-尾聚合物 |
| headache | 头痛；发出的警告喊声 |
| header block | 记录头块 |
| header bytes | 记录头字节 |
| header identifier | 文件头识别标记 |
| header label | 磁带头标号 |
| header record | 记录头 |
| header table | 图头表 |
| header word | 道头字；标题字 |
| headgear | 转盘传动机构；头戴听筒 |
| headhand | 头戴听筒 |
| heading section | 图头部分 |
| headline | 压头线；标题；新闻广播的摘要 |
| headpiece | 帽子；头戴受话机；头脑；顶部物 |
| heads | 头部馏分 |
| headstock | 床头箱 |
| headway per drill bit | 钻头进尺 |
| headwork | 脑力劳动；拱顶石饰；渠头控水建筑物 |
| hedging | 套头措施 |
| helmet shield | 头盔面罩 |
| helmet-hose diving apparatus | 头盔-软管潜水设备 |
| hemispherical head | 半球形加压头 |
| hermaphrodite connector | 公母接头 |
| hex hd | 六角头 |
| hex nipple | 六角形管接头 |
| hex union | 六角接头 |
| hex-head screw | 六角头螺钉 |
| hexagon head bolt | 六角头螺栓 |
| hexagonal shoulder nipple | 内六角接头 |
| hidden outcrop | 掩蔽露头 |
| high speed bit | 高速钻头 |
| high-deflection bent sub | 大斜度弯接头 |
| high-head | 大压头；高压头的 |
| high-pressure erosion bit | 高压冲蚀钻头 |
| Hild differential drive | 赫氏钻头给进差动装置 |
| hillside sand | 仅磨钻头一侧的砂岩 |
| hinged pipe | 旋转接头管 |
| hobnail | 平头钉；钉平头钉于 |
| hole coverage | 钻头牙齿与井底接触面积 |
| hollow bit | 岩心钻头 |
| hook bolt | 钩头螺栓 |
| hook off | 抽油杆停动接头；卸开 |
| Hook's joint | 万向接头；万向联轴节 |
| hook-up nipple | 连顶接头 |
| Hooke | 万向接头 |
| Hooke's coupling | 万向接头；万向联轴节 |
| horizon-to-horizon camera | 三镜头航空摄影机 |
| horse cock | 钻头；泥浆软管 |
| horsehead | 驴头 |
| hose adapter | 软管接头 |
| hose connection | 水龙带接头 |
| hose union | 水龙头活接头 |
| hybrid bit | 混合式钻头 |
| hybrid | 混合的；混合物；混合接头；混杂岩 |
| hydraulic bent sub | 水力弯接头 |
| hydraulic bit horsepower | 钻头水马力 |
| hydraulic catwork | 液压猫头 |
| hydraulic circulating head | 循环头 |
| hydraulic coupling | 液力接头 |
| hydraulic firing head | 水力发火头 |
| hydraulic gun release sub | 射孔器水力丢手接头 |
| hydraulic head surface | 水头面 |
| hydraulic head | 水头 |
| hydraulic orienting sub | 水力定向接头 |
| hydraulic pressure head | 水压压头 |
| hydraulic ram | 液力冲头；液压防喷器闸板；液压支腿；液压油缸 |
| hydraulic swivel head | 液压旋转水龙头 |
| hydro-trip pressure sub | 水力活塞压力接头 |
| hydrostatic head | 流体静压头 |
| hydrostatic lock | 静水头阻塞 |
| IJTBG | 整体接头油管 |
| imapct reverse sub | 压紧式反向接头 |
| impact action bit | 冲击作用的钻头 |
| impact drill bit | 冲击钻头 |
| impregnated bit | 潜铸式钻头 |
| inclinational bit side force component | 井斜钻头侧向分力 |
| included angle of teeth | 钻头齿间铣刀角 |
| increaser | 异径接头；连轴齿套 |
| incrop | 掩盖露头 |
| indenter | 压头 |
| indicator sub | 指示接头 |
| inertial hydraulic head | 惯性水头 |
| injector head | 注入头 |
| insert bit | 镶硬合金齿的牙轮钻头 |
| insert natural diamond bit | 天然金刚石镶齿钻头 |
| insert polycrystalline diamond bit | 聚晶金刚石镶齿钻头 |
| insert rock bit | 镶硬合金齿牙轮钻头 |
| insert tubing splice | 插入式油管接头 |
| inserted sleeve | 插入式接头 |
| insulating joint | 绝缘接头 |
| insulating plastic nipple | 塑料绝缘接头 |
| insulating sub | 绝缘接头 |
| int.jt. | 整体接头 |
| intake head | 吸入压头 |
| integral joint | 整体接头 |
| integral swivel bail | 整体式水龙头提环 |
| integral tool joint | 整体钻杆接头 |
| intermediate head | 中间接头 |
| internal floating head | 内浮头 |
| internal flush tool joint | 内平钻杆接头 |
| isolating joint | 绝缘接头 |
| J | 连接；连接线；接头 |
| jackbird | 需上油的接头 |
| jacket collar | 衬套接头 |
| jet bit drilling | 喷射钻头钻井 |
| jet bit | 喷射式钻头 |
| jet holder | 喷丝头座 |
| jet nozzled rock bit | 喷射式钻头 |
| jet room | 喷丝头室 |
| jet spud bit | 喷射开眼钻头 |
| jet stretch ratio | 喷头拉伸比 |
| jet type tricone bit | 喷射式三牙轮钻头 |
| jet-pump pellet impact drill bit | 霰弹钻井钻头 |
| jet-sub | 喷射接头 |
| jetty head | 防波堤堤头部 |
| jetty mounted radar | 码头雷达 |
| jetty mounted sonar | 码头声呐 |
| jetty type wharf | 突堤式码头 |
| joint bond | 接头跨接线 |
| joint coating project | 接头涂覆工程 |
| joint grease | 接头润滑剂 |
| joint nut | 两头螺母 |
| joint packing | 接头垫圈 |
| joint shaft box | 铰接轴母螺纹接头 |
| joint shaft pin | 铰接轴公螺纹接头 |
| joint template | 钻杆接头螺纹规；接头样板 |
| journal bearing bit | 滑动轴承钻头 |
| journal bearing button bit | 轴颈轴承球齿钻头 |
| journal bearing insert bit | 轴颈轴承镶齿钻头 |
| junk bit | 磨铣钻头 |
| junk damage | 钻头外侧磨损 |
| junk sub | 打捞接头 |
| kelly bar sub | 方钻杆接头 |
| kelly joint | 方钻杆接头 |
| kelly-saver sub | 方钻杆保护接头 |
| kick sub | 造斜接头 |
| kinetic head | 速度头 |
| kite bill | 空头支票 |
| knee head loss | 弯管水头损失 |
| knock bit off | 松开钻头与钻柱间的固定销 |
| knock out sub | 撞击接头 |
| knock-off joint | 停动接头 |
| knocker sub | 震击器用冲击接头 |
| knockout bleeder collar | 泄阀接头 |
| labyrinth joint | 迷宫密封接头 |
| lag screw | 方头螺钉 |
| land for crosshead | 十字头填料压盖 |
| landing base | 套管头底盘 |
| landing head | 油管头 |
| landing pier | 起货码头 |
| landing stage | 上岸码头趸船 |
| landing sub | 联顶接头 |
| lap joint stub end | 翻边管弯头 |
| large-stone bit | 粗粒金刚石钻头 |
| laryngophone | 喉头送话器 |
| Layrub universal joint | 莱鲁布万向接头 |
| lead bit | 导向钻头 |
| lead seal adapter | 铅封接头 |
| lead seal drive-over adapter | 铅封压入接头 |
| leak off connection | 放泄接头 |
| ledger side | 死绳头外余绳 |
| left-hand safety connector | 左旋安全接头 |
| left-hand tool joint thread | 左旋钻杆接头螺纹 |
| lens resolution | 镜头分辨力 |
| lens-ground joint | 透镜型接地接头 |
| lifting sub | 提升接头 |
| lighter's wharf | 驳船码头 |
| liner adapter | 衬管接头 |
| liner stab | 衬管插入接头 |
| liner top sub | 衬管顶部接头 |
| liquid head | 液柱压力；液头 |
| load on bit | 钻头负荷 |
| load-carrying swivel joint | 承载旋转接头 |
| loading dock | 灌油码头 |
| locator sub | 定位接头 |
| locator tubing seal nipple | 油管定位密封接头 |
| log heading | 测井图头 |
| logging head | 测井仪器 接头 |
| LOGHDG | 测井图头 |
| long position | 多头 |
| long radius reducing elbow | 长径异径弯头 |
| long toothed bit | 长齿钻头 |
| longshoreman | 码头装卸工人 |
| loss in head | 压头损失 |
| lost velocity head | 速度头损失 |
| low beam | 车头短焦距光 |
| low head | 低压头 |
| lower adaptor | 下接头 |
| lower sub | 下接头 |
| machine set bit | 机镶细粒金刚石钻头 |
| Macrotorispora | 大一头沉孢属 |
| magic T | 混合三通接头 |
| magnetic bit extractor | 磁力钻头打捞器 |
| magnetic disc head | 磁盘磁头 |
| magnetic head materials | 磁头材料 |
| magnetic head | 磁头 |
| male and female cross | 阳螺纹-阴螺纹十字接头 |
| male and female joint | 阳螺纹-阴螺纹接头 |
| male connector | 插头；阳螺纹接头 |
| male joint | 阳螺纹接头 |
| male plug | 插头 |
| male stab | 插头 |
| mandrel substitute | 异径接头 |
| manifold header | 集管头 |
| manometer-thermometer sonde | 压力计-温度计探头 |
| manometric head | 压力头 |
| margin of drill | 钻头切削边缘；钻锋圆边 |
| marginal type wharf | 顺岸码头 |
| marine swivel | 船用旋转接头 |
| masthead | 桅顶；报头栏；报头 |
| Matheson and Dresser joint | 防漏接头 |
| Matheson joint | 钟形接头 |
| mating endcap | 配套堵头 |
| measuring head | 测量头 |
| measuring sonde | 测量探头 |
| medium-stone bit | 中粒金刚石钻头 |
| microbit drilling test | 微钻头钻进试验 |
| microbit | 微型钻头；微比特 |
| microhead | 硬磁头 |
| milled screw | 滚花头螺钉 |
| milled tooth bit | 铣齿钻头 |
| milling bit | 铣磨钻头 |
| misalignment union | 非直线活动接头 |
| miser | 凿井机；钻探机；管形提泥钻头 |
| mitre elbow | 虾米腰弯头 |
| mitre joint | 斜接头 |
| mock tool joint | 假钻杆接头 |
| modeled bow | 依照模型造的船头 |
| modified crossover sub | 改进型转换接头 |
| mole head | 突堤堤头；防波堤头 |
| mooring head | 系泊头 |
| morpheme | 词头 |
| motor-bent sub combination | 马达-弯接头组合 |
| movable contact | 活动触头 |
| movable head | 可动式磁头 |
| mud bit | 钻泥层用钻头 |
| mud motor-bent sub | 泥浆马达-弯接头 |
| mule foot a bit | 钻头偏磨 |
| mule head | 驴头 |
| mule-head hanger | 驴头上挂抽油杆的装置 |
| muleshoe sub | 斜口接头 |
| multi-holed jet | 多孔喷丝头 |
| multi-pass swivel | 多路旋转接头 |
| multi-pede traverse system | 多头横动体系 |
| multi-start | 多头；多头的 |
| multi-step thread | 多头螺纹 |
| multiheaded oil blob | 多头油滴 |
| multilens composite photo | 多镜头联配相片 |
| multilens photography | 多镜头摄影术 |
| multiple had draw frame | 多头拉伸机 |
| mushroom head method | 蘑菇头法 |
| N-bit | 直径2 1516英寸金刚石钻头 |
| nagelfluh | 钉头砾岩 |
| natural exposure | 天然露头 |
| navigation sub | 导向接头 |
| NC style tool joint | 数字型钻杆接头 |
| near balanced hydrostatic head | 接近平衡的静水压头 |
| near-bit reamer | 近钻头扩大器 |
| near-bit stabilizer | 近钻头稳定器 |
| near-bit-influx detector | 近钻头地层流体浸入检测器 |
| needle probe | 针形探头 |
| negative suction head | 真空吸入压头 |
| nest plate | 模穴套板；冲头板 |
| net head | 净水头 |
| net pressure head | 净压头 |
| nipple | 接头 |
| nipple-hex | 六角内接头 |
| no-go sub | 终端接头 |
| non-magnetic sub | 无磁性接头 |
| non-offset bit | 牙轮轴线不偏移的钻头 |
| nonself-clearing bit | 非自洁式牙轮钻头 |
| normal bend | 直角弯头；90°弯管 |
| normal probe | 直探头 |
| nose cone | 头部 |
| nose covering | 机头罩 |
| nose filter | 头部过滤器 |
| nose-out | 鼻状露头 |
| nozzle block | 纺丝头组件 |
| nozzle filter | 纺丝头喷嘴滤器 |
| nozzle head | 纺丝头喷嘴 |
| nylon stopper | 尼龙堵头 |
| oblique T joint | 斜T形接头 |
| Obtusochara | 钝头轮藻 |
| odd bit behavior | 钻头工况异常 |
| off-balance bit | 偏心钻头 |
| offset box wrench | 偏头套筒扳手 |
| offset cone bit | 移轴牙轮钻头 |
| offset socket wrench | 弯头套筒扳手 |
| offset sub | 偏斜接头 |
| offset tubing head | 偏心油管头 |
| offset wellhead | 偏心套管头 |
| offshore terminal | 浮码头 |
| oil head | 油压头；油头 |
| oil immersion lens | 油浸镜头 |
| oil jetty | 石油码头 |
| oil pipe connection | 油管接头 |
| oil tray for crosshead | 十字头油槽 |
| oil-sealed jar safety joint | 油封式震击器安全接头 |
| oligopoly | 寡头垄断 |
| open joint | 对接接头 |
| open-wharf mooring island | 系泊岛式码头 |
| opening bit | 矫形钻头 |
| operating head | 工作压头 |
| optical head | 光度头 |
| optimum bit program | 最优钻头程序 |
| oral agreement | 口头协定 |
| oral contract | 口头协议 |
| oral report | 口头报告 |
| oral | 口头的 |
| orientation latchdown sub | 定向闭锁接头 |
| orientation sub | 定向接头 |
| orienting sub | 定向接头 |
| oscilloprobe | 示波器测试头 |
| out of gauge bit | 尺寸不合标准的钻头 |
| outcrop area | 露头区；出露面积 |
| outcrop columnar section | 露头柱状剖面图 |
| outcrop coring | 露头取心 |
| outcrop | 露头 |
| outcropping | 露头 |
| outside-packed floating exchanger | 外填料式浮头换热器 |
| oval fillister-head screw | 凹槽椭圆头螺钉 |
| oval nail | 椭圆头钉 |
| oversold position | 空头 |
| P | 插头 |
| p-m erasing head | 永磁消磁头 |
| pack assembly | 喷丝头组件 |
| pack life | 纺丝头组合件使用周期 |
| pack-off adapter | 密封接头 |
| packer adapter | 封隔器接头 |
| paddle reaming bit | 翼状扩孔钻头 |
| paddy bit | 伸缩式钻头 |
| paddy | 刀翼受压张开的钻头 |
| palilate | 乳头状 |
| pan head screw | 大柱头螺钉 |
| pane | 窗格玻璃；长方格；锤头；嵌板；嵌玻璃 |
| panhead | 截锥头 |
| papilla | 乳头状突起 |
| paraffin bit | 清蜡钻头 |
| paramount | 头等的 |
| PDC bit | 聚晶金刚石复合片钻头 |
| PDC stud PDC | 钻头支柱式切削齿 |
| PEH | 射孔设备接头 |
| pellet impact bit | 霰弹钻钻头 |
| penstock | 水渠；节制闸门；压头管线；压力输送管 |
| percussion bit | 冲击钻头 |
| perennial | 一年到头的 |
| Permanent-magnet erasing head | 永磁消磁头 |
| photohead | 光电传感头 |
| pibd | 钻头直径每英寸磅数 |
| pierhead | 防波堤头部 |
| piezometric head | 测压水头 |
| pike | 针头 |
| piled jetty | 突栈桥码头 |
| piled pier | 突栈桥码头 |
| pilot bit | 领眼钻头 |
| pilot guide bit | 导向钻头 |
| pin angle | 牙轮轴线与钻头底平面夹角 |
| pin-and-socket connection | 插头-插座连接 |
| pin-to-box sub | 阳螺纹-阳螺纹接头 |
| pin-to-pin reducer | 两头阳螺纹的大小头 |
| pinpoint | 针头 |
| pipe adapter | 管接头 |
| pipe expansion joint | 管子伸缩连接；伸缩管接头；伸缩器；补偿器 |
| pipe reducer | 大小头 |
| pipe sleeve joint | 管套接头 |
| pipe swing | 管子活动接头 |
| pipe union | 管子活接头 |
| piston head | 活塞头 |
| pitch of drill | 钻头轴距 |
| PL | 栓；插头 |
| plain adapter | 平接头 |
| plain dividing head | 普通分度头 |
| plain elbow | 不带边弯头 |
| plain end adapter | 平头接管器 |
| plain fishtail | 普通的鱼尾钻头 |
| plate cap | 屏极引出头 |
| platten | 焊机床面；滑块；冲头；压扁；弄平；制箔 |
| playback head | 读出磁头 |
| plinth | 柱础；底座；接头座 |
| plug connector | 插塞接头 |
| plug contact | 插头 |
| plug container | 水泥头 |
| plug cut-out | 安全插头 |
| plug drain | 带塞头的排泄孔 |
| plugged bit | 堵塞的取心钻头 |
| pneuma-jet system | 喷气引头机构 |
| point beach | 湾头滩 |
| pointed end | 尖头 |
| polished rod head | 光杆头 |
| poll tax | 人头税 |
| polycrystalline diamond compact bit | 聚晶金刚石复合片钻头 |
| polytropic head | 多变压头 |
| pontoon | 浮筒；浮桥；起重机船；平底船；浮码头空气舱 |
| porcelain nozzle | 瓷质纺丝头 |
| pore water head | 孔隙水压头 |
| ported sub | 带孔接头 |
| potential head | 静压头 |
| power drilling sub | 动力接头 |
| power sub | 动力接头 |
| power swivel | 动力水龙头 |
| pref. | 词头 |
| prefix | 词头 |
| premature bit change | 过早更换钻头 |
| premature bit failure | 钻头过早磨损 |
| preshoot | 前置尖头信号；前冲 |
| pressure head | 压头；扬程 |
| pressure terminal | 密封插头 |
| price leadership | 带头作价 |
| prismoid | 平截头棱锥体 |
| probe head | 探头 |
| probe inclinometer | 探头式倾角计 |
| probe | 探头 |
| prong | 尖头 |
| proteo- | 【词头 |
| prow | 船头；机头；突出的前端；防冲设施头部 |
| pull it green | 钻头未磨损或磨损不大就起出；螺纹拧得过紧 |
| pulling head | 拖管头 |
| pump head | 泵压头 |
| pump rod joint | 抽油杆接头 |
| pumping head | 泵压头 |
| quay | 码头 |
| quick union | 快接接头 |
| quick-acting coupling | 快速接头 |
| quick-change plug container | 快卸式水泥头 |
| quick-release coupling | 快卸接头 |
| RAB tool | 钻头处电阻率测井仪 |
| radial bearing lower drive sub | 下部径向轴承传动接头 |
| radial bearing upper drive sub | 上部径向轴承传动接头 |
| raised-head screw | 凸头螺钉 |
| raising and lowering of bit | 钻头上下跳动 |
| rammer | 夯；撞锤；压头；通条；装填器 |
| rapid-acting coupling | 快速接头 |
| rat hole bit | 小井眼钻头 |
| rated head | 额定压头 |
| rd.hd. | 圆头 |
| read-record head | 读写磁头 |
| read-write head | 读写磁头 |
| reading head | 读出头 |
| reamer bit | 扩眼钻头 |
| reamer | 扩眼钻头 |
| reaming bit | 扩眼钻头 |
| reaming pilot adapter | 扩眼导杆接头 |
| receptacle plug | 插头 |
| recesed flanged joint | 埋头法兰接头 |
| record heading | 记录图头 |
| record-header | 记录头 |
| record-reproduce head | 录放两用磁头 |
| redrill bit | 扩眼钻头 |
| reduced section sub | 变截面接头 |
| reducing elbow | 异径弯头 |
| reducing joint | 异径接头 |
| reducing piece | 缩径接头 |
| Reed roller bit | 瑞德牙轮钻头 |
| reflux divider | 分馏头 |
| REG | 正规扣接头 |
| regular junk mill | 正规平头铣鞋 |
| regular tool joint | 正规接头 |
| reinforced concrete piled jetty | 钢筋混凝土桩突码头 |
| release sub | 丢手接头 |
| remote-controlled bent sub | 遥控弯接头 |
| reproducing head | 回放磁头 |
| residual head | 剩余水头 |
| residual outcrop | 残余露头 |
| resistance head | 摩擦压头 |
| retaining cap | 头套 |
| retractable bit | 伸缩式钻头 |
| retractable core bit | 可收缩取出的取心钻头 |
| retrieving head | 可回收的打捞头 |
| rettiper | 收废旧钻头者 |
| return bend header | 回弯头箱 |
| return bend | 回转弯头 |
| return elbow | 回弯头 |
| reverse circulation sub | 反循环接头 |
| rigid joint | 刚性接头 |
| ringing of joint | 接头的锤敲检查 |
| river clamp | 丝后接头加强箍 |
| rock bit | 牙轮钻头 |
| rock drill steel | 钎头 |
| rock outcrop | 岩石露头 |
| rock roller bit | 牙轮钻头 |
| rock-bit interaction model | 岩石-钻头互作用模式 |
| rock-bit interaction | 岩石与钻头互相作用 |
| rod connector | 抽油杆接头 |
| rod reducer | 抽油杆异径接头 |
| rod reducing bushing | 抽油杆异径接头 |
| rod reducing coupling | 抽油杆异径接头 |
| roller bearing bit | 滚柱轴承钻头 |
| roller bit | 牙轮钻头 |
| roller cone bit | 牙轮钻头 |
| roller cutter bit | 牙轮钻头 |
| rolling cutter rock bit | 牙轮钻头 |
| rotary bit | 旋转钻井用钻头 |
| rotary drilling swivel | 旋转钻井水龙头 |
| rotary swivel | 水龙头 |
| rotary top sub | 顶部旋转接头 |
| rotating head | 旋转头 |
| round head screw | 圆头螺钉 |
| round head | 圆头 |
| round nose mill | 圆头铣鞋 |
| round pointed | 圆头的 |
| round-ended cylinder | 卧式凸头油罐 |
| round-head rivet | 圆头铆钉 |
| round-point shovel | 圆头铁锹 |
| roustabout | 不熟练的工人；码头工人 |
| row crop | 行露头 |
| rubber connnection | 橡皮接头 |
| rudder coupling | 舵杆接头 |
| rudder crosshead | 舵十字头 |
| rudder head | 舵头 |
| rundle | 梯级；绞盘头 |
| running head | 运转操作头 |
| safety control head | 安全控制头 |
| safety joint | 安全接头 |
| safety shear sub | 安全剪切接头 |
| safety sub | 安全接头 |
| SAH | 旋转接头 |
| saloon deck | 头等舱甲板 |
| sample outcrop | 样品露头 |
| sampling head | 采样头 |
| sand erosional probe | 砂粒冲蚀探头 |
| sand probe | 含砂探测头 |
| saver sub | 保护接头 |
| SBHHP | 钻头比水马力 |
| SBM loading terminal | 单浮筒系泊装油浮动码头 |
| scanner head | 扫描头 |
| scarp | 马头丘 |
| scintillation probe | 闪烁探头 |
| screw home | 拧到头 |
| screw plug | 螺旋塞；螺纹堵头 |
| screwed nipple | 螺纹接头 |
| scupper plug | 排水孔的堵头 |
| sea terminal | 海上浮码头 |
| seal joint | 密封接头 |
| seal nipple | 密封接头 |
| seal sub | 密封接头 |
| sealed bearing rock bit | 密封轴承牙轮钻头 |
| sealing adaptor | 密封接头 |
| searching unit | 探头 |
| seismic while drilling | 以井底钻头声能为震源的地震方法 |
| selective headstock | 床头箱 |
| self-cleaning bit | 自洗式钻头 |
| self-cleaning connectors | 自清洗接头 |
| self-clearing bit | 自洁式牙轮钻头 |
| self-sharpening bit | 自锐钻头 |
| semi-spherical bit | 半球形钻头 |
| semiround nose bit | 半圆形冠部钻头 |
| sensing probe | 传感探头 |
| service heading | 记录图头 |
| set bit | 嵌镶钻头；置位 |
| set up the tool joint | 配装钻杆接头 |
| setting head | 坐放头 |
| seven-connector electrical male plug | 七芯电插头 |
| shaft adapter | 轴接头 |
| shank size | 接头尺寸；柄的尺寸 |
| shank | 接头部分 |
| shaped insert bit | 非球形硬合金齿钻头 |
| shaper | 形成电路；牛头刨床 |
| shaping machine | 牛头刨床 |
| sharp bend | 急弯；突转弯头；突转弯道 |
| sharpshooter | 方头窄铁锹 |
| shear joint | 剪切接头；剪节理 |
| shear pin safety joint | 剪切销钉式安全接头 |
| shear pin tubing safety joint | 剪切销式油管安全接头 |
| shear sub | 剪切接头 |
| shear-up adaptor | 剪切配合接头 |
| shearout ball seat sub | 剪切球座接头 |
| shell clearance | 扩孔器与钻头直径之差 |
| shooting head | 引爆头 |
| short hedge | 卖空套头 |
| short position | 空头 |
| short radius 180 return | 短径回弯头 |
| short radius 90 elbow | 短径直角弯头 |
| shoulder dressing tool | 钻杆接头端面整形工具 |
| shoulder of the box | 母接头的端面 |
| shoulder of tool joint | 钻杆接头台肩 |
| shoulder up | 接头连接时端面压紧 |
| shrink grip tool joint | 烘装钻杆接头 |
| shrinking of tool joint | 接头冷缩 |
| shrunk-on tool joint | 烘装接头 |
| shut off head | 关井压头 |
| SI Prefixes | 标准国际单位制词头 |
| side entry sub | 旁通接头 |
| side-tracking bit | 侧钻钻头 |
| sidehill | 套管下扩眼钻头 |
| single bell joint | 单铃状接头 |
| single offset quarter bend | 单侧偏心直角弯头 |
| single point mooring terminal | 单点系泊浮动码头 |
| single thread | 单头螺纹 |
| single-bladed bit | 刮刀钻头 |
| single-end wall packer | 单头井壁封隔器 |
| single-lens camera | 单镜头摄影机 |
| single-pole-piece magnetic head | 单极磁头 |
| sinking head | 埋头 |
| sintered tungsten carbide compact bit | 镶碳化钨硬合金齿钻头 |
| slack joint | 松紧接头 |
| slake tub | 钻头淬火箱 |
| sleeve-weld joint | 加套管焊接接头 |
| slick joint | 可承压的加封填料的管子接头 |
| slim hole joint | 小眼接头 |
| sloper | 异径接头 |
| slotted stab | 有槽插头 |
| SLR | 单镜头反射 |
| snap head bolt | 圆头螺栓 |
| snap head rivet | 圆头铆钉 |
| socket bend | 管节弯头 |
| socket head pipe plug | 圆头管塞 |
| socket screw | 凹头螺钉 |
| socket washer | 埋头垫圈 |
| soft end | 缺捻纱；懈线；粗纱头；碎棉条 |
| SOH | 标头开始 |
| soil gas sensor | 壤气探头 |
| soldered joint | 焊接头 |
| solid plug | 实心堵头 |
| solid-type jetty | 重型突码头 |
| sonde body | 探头体；线圈系 |
| sonic drill | 振动钻孔机；声波钻头 |
| sonic logging sonde | 声波测井探头 |
| sonic probe | 声波探头 |
| spacer nipple | 间隔接头 |
| spear-head | 混油头；打捞矛头 |
| specific lobe | 头数比 |
| spherical nose | 圆形凸头 |
| spider | 蜘蛛；星形接头 |
| spigot | 套口接头；插头；塞子 |
| spike | 大钉；尾橇；测试信号；峰值；钉上大钉；把头弄尖；使形成峰值；阻止；尖峰信号 |
| spin-stretching | 喷丝头拉伸；纺丝拉伸 |
| spinneret draft | 喷丝头拉伸 |
| spinning cathead | 上扣猫头 |
| spinning draft | 纺丝头拉伸 |
| spinning head | 喷丝头 |
| spinning-in system | 生头装置 |
| spiral bit | 螺旋形钻头 |
| split filling point | 两头加油站 |
| sprig | 无头钉；打钉 |
| SPT | 储油-采油浮码头 |
| SPT | 探头极板类型 |
| spud bit | 开眼钻头 |
| spud | 压板；剥皮刀；定位桩；溢水接管；打捞工具；尖头钻头；开钻；柱脚 |
| spudding bit | 开眼钻头 |
| square bend | 直角弯头 |
| square bent | 直角弯头 |
| square elbow | 直角弯头 |
| square head bolt | 方头螺栓 |
| square joint | 方接头 |
| SSB | 声波探头测试盒 |
| staggered interruption | 钻头齿交错断缺 |
| stair | 梯级；楼梯；浮码头 |
| standard tool joint | 标准钻杆接头 |
| star bit | 十字形钻头；星形钻头 |
| starve a pump | 泵吸入端压头太小 |
| static head | 静压头 |
| statical head | 静压头 |
| steam jet | 蒸汽喷射；蒸汽喷头 |
| steel tooth bit | 钢齿钻头 |
| step bit | 阶梯式钻头 |
| step type bit | 阶梯形钻头 |
| step type drag bit | 阶梯形刮刀钻头 |
| stepped bit | 阶梯钻头 |
| stepped drag bit | 阶梯刮刀钻头 |
| stepped thread adaptor | 异径螺纹接头 |
| stinger | 导向插头；注水泥插头 |
| stirrup | 夹头 |
| stock key | 钩头键 |
| stoodite | 一种镶焊钻头用的硬合金 |
| stopper | 塞；止动轧头；挡环；制动器；阀；封堵器 |
| storageproduction terminal | 储油-采油浮码头 |
| straight OD sub | 同径接头 |
| street elbow | 带内外螺纹的弯管接头 |
| stripper head | 封井头 |
| stub-end turnbuckle | 截头松紧螺丝 |
| stud bolt | 双头螺栓 |
| stud driver | 双头螺栓扳手 |
| stud remover | 双头螺栓拧出器 |
| stud | 双头螺栓 |
| studded tube | 钉头管 |
| stuffing box casing head | 盘根盒式套管头 |
| sub type nut | 接头型螺母 |
| sub-body | 接头 |
| subcrop trap | 隐伏露头圈闭 |
| subcrop | 隐伏露头 |
| suboutcrop | 隐伏露头 |
| subterranean outcrop | 掩盖露头 |
| subterraneous outcrop | 掩盖露头 |
| sucker rod substitute | 抽油杆接头 |
| suction head | 吸水头；吸升力 |
| suction lift | 吸水头 |
| supercrop trap | 隐覆露头圈闭 |
| supercrop | 不整合面上仰视露头 |
| sure-fire firing head | 保险的发火头 |
| surface occurence | 地表显示；地面产状；地表露头 |
| suspended joint | 悬式接头 |
| suspension joint | 悬挂接头 |
| swage nipple | 大小头短节 |
| swage | 异径管子短节；大小头；管子整形器；井下套管整形器；模 |
| swedged nipple | 大小头短节 |
| swing pit | 摇头管集油袋 |
| swivel adapter head | 旋转接头 |
| swivel bail | 水龙头吊环 |
| swivel body | 水龙头外壳 |
| swivel bumper | 水龙头吊环防碰器 |
| swivel gooseneck | 水龙头的鹅颈管 |
| swivel joint | 旋转接合；旋转接头 |
| swivel neck | 水龙头鹅颈；旋转颈 |
| swivel pipe | 旋转接头管 |
| swivel pulley | 带旋转头的滑轮 |
| swivel stem | 水龙头中心管 |
| swivel sub | 水龙头接头 |
| swivel wrench | 钻头装卸器 |
| swivel | 旋转接头 |
| swivelling union | 旋转活接头 |
| T | 三通管接头 |
| T-head | 丁字头 |
| T-joint | 丁字接头 |
| T.D.H. | 出口总压头 |
| tack claw | 平头钉拔除器 |
| tag sub | 示踪接头 |
| take-off connection | 分支接头 |
| take-out | 抽头 |
| tandem near-bit stabilizer | 串接近钻头稳定器 |
| tank winch | 油罐内摇头管装置 |
| tanker loading terminal | 油轮装油码头；装船油库 |
| tap transformer | 抽头变压器 |
| tap | 水龙头 |
| taper wall bit | 带内锥面的金刚石钻头 |
| tapered core bit | 锥形取心钻头 |
| tapered step-core bit | 锥形阶梯取心钻头 |
| tapped coil | 抽头线圈 |
| TB | T形接头 |
| TDH | 总动压头 |
| tee joint | T型接头 |
| teeth of the bit | 钻头的齿 |
| tele-orientation adjustable bent sub | 遥控定向可调式弯接头 |
| telescopic yarn threading system | 套筒式丝条生头装置 |
| tension-control cylinder | 控制钻头给进的液压缸 |
| thermal head | 热头 |
| THF | 油管头法兰 |
| thin drilling bit | 薄壁钻头 |
| thin faced bit | 薄壁金刚石钻头 |
| thin-film head | 薄膜磁头 |
| threaded adapter | 螺纹接头 |
| threaded connector | 螺纹接头 |
| threaded sleeve joint | 螺纹套筒接头 |
| three point bit | 三刃钻头 |
| three point neat-bit reamer | 三点式近钻头扩眼器 |
| three roller bit | 三牙轮钻头 |
| three-blade bit | 三刮刀钻头 |
| three-cone bit | 三牙轮钻头 |
| three-diameter ells with tangents | 带切线直管段的三倍直径弯头 |
| three-start screw | 三头螺纹 |
| three-way bit | 三刮刀钻头 |
| three-winged bit | 三刮刀钻头 |
| throwaway bit | 磨损报废的钻头 |
| thrust of pump | 泵的压头 |
| tieback sub | 回接接头 |
| timber piled jetty | 木桩突栈桥码头 |
| Tingocephalus | 丁氏头虫属 |
| tip bit | 尖钻头 |
| tipped bit | 补强钻头 |
| TOB | 钻头扭矩 |
| tong head | 钳头 |
| tool joint box | 内螺纹钻杆接头 |
| tool joint gage | 工具接头规 |
| tool joint hard band | 工具接头的硬合金抗磨圈 |
| tool joint leak detector | 工具接头泄漏检测器 |
| tool joint locator | 工具接头定位器 |
| tool joint lubricator | 钻具接头润滑剂 |
| tool joint pin | 外螺纹钻杆接头 |
| tool joint wobble | 工具接头摆动 |
| tool joint | 钻具接头 |
| tool shiner | 钻头修理工 |
| tooljointcasing contact force | 工具接头与套管接触力 |
| tools to tubing substitute | 钻具连接油管的接头 |
| tooth bit | 钢齿轮钻头 |
| tooth-wheel bit | 牙轮钻头 |
| toothed bit | 牙轮钻头 |
| top control head | 顶部控制头 |
| top sub | 上部接头 |
| top-drive hydraulic power head | 顶部驱动液压动力头 |
| top-drive power head | 顶部驱动动力头 |
| top-drive power swivel | 顶部驱动水龙头 |
| Torispora | 一头沉孢属 |
| torque-on-bit | 钻头扭矩 |
| total head | 总压头 |
| total static head | 总静压头 |
| towing bridle | 拖缆笼头 |
| trace header modification | 道头修改 |
| trace header | 道头 |
| transfer head | 转换压头 |
| transshipment terminal | 储油-卸油浮动码头 |
| transverse planing machine | 牛头刨床 |
| tricone bit | 三牙轮钻头 |
| tricone rock bit | 三牙轮岩石钻头 |
| trigger bit | 带岩心爪的取心钻头 |
| tripod head | 三脚架头 |
| tripped firing head | 撞击发火头 |
| true-rolling bit | 纯滚动牙轮钻头 |
| trunnion joint | 耳轴式万向接头 |
| truss head rivet | 大圆头铆钉 |
| TSD bit | 热稳定性能好的金刚石钻头 |
| tube turn | 回弯头 |
| tubing bonnet | 油管头 |
| tubing control head | 油管控制头 |
| tubing head sampler | 油管头采样器 |
| tubing head | 油管头 |
| tubing safety joint | 油管安全接头 |
| tubing sub | 油管接头 |
| tubing swivel | 油管旋转头 |
| tungsten carbide button bit | 碳化钨球齿钻头 |
| tungsten carbide insert bit | 镶齿钻头 |
| tungsten insert bit | 镶础化钨齿的钻头 |
| tungsten-carbide-tipped bit | 碳化钨镶尖钻头 |
| turbo-core bit | 涡轮取心钻头 |
| turbobit | 涡轮钻进用钻头 |
| turn home | 拧到头 |
| turning basin | 掉头区 |
| twin oblique photography | 双镜头倾斜摄影术 |
| twin pin body | 两端阳螺纹接头 |
| twin-cone bit | 双牙轮钻头 |
| twist-off on the bottom | 钻头切削刃折断 |
| two-cone bit | 双牙轮钻头 |
| two-head automatic arc welding machine | 自动双头弧焊机 |
| two-roller bit | 双牙轮钻头 |
| two-way bit | 双刮刀钻头 |
| tying-in | 接死头 |
| U-bend | U形弯头 |
| ultrasonic probe | 超声波探头 |
| undercutting | 底切；掏槽；钻杆接头下端面磨蚀 |
| undergauge bit | 缩径钻头 |
| undergauge hole | 小于钻头的井眼 |
| underreaming bit | 套管下扩眼钻头 |
| universal contact | 万能接头 |
| unplug | 拔去塞子；拔去插头；去掉障碍物 |
| unprotected tool joint | 无保护的钻杆接头 |
| upset end joint | 加厚接头 |
| UVC | 万能接头 |
| vapour-proof connection | 不漏汽接头 |
| variable head permeameter | 可变压头渗透仪 |
| velocity head | 速度头 |
| verbal agreement | 口头协定 |
| verbal communication | 口头联系 |
| Victaulic coupling | 维克托利克型管接头 |
| volume header label | 卷头标号 |
| walking out | 追索露头法 |
| warhead | 弹头 |
| warm up a connection | 敲击螺纹接头使之松动 |
| wash pipe swivel | 冲管旋转接头 |
| washover safety joint | 套洗安全接头 |
| water faucet | 水龙头 |
| water head | 水头 |
| water swivel | 水龙头 |
| webbed bit | 蹼式钻头 |
| weld ell | 焊接弯头 |
| weld-on type tool joint | 焊接式钻杆接头 |
| welded joint | 焊接接头 |
| welder with taps | 抽头式焊机 |
| welding joint | 焊接接头 |
| wet connector | 湿接头 |
| wet dock | 湿坞；码头 |
| Wh | 码头 |
| wharf charges | 码头费 |
| wharf crane | 码头起重机 |
| wharf due | 码头税 |
| wharf ladder | 码头梯子 |
| wharf wall | 码头岸墙 |
| wharf | 码头 |
| wharfage | 码头使用费；码头设备 |
| wheelhead | 砂轮头 |
| whf | 码头 |
| whipstock adaptor | 造斜器异径接头 |
| whirl-resistant bit | 防止偏心转动的钻头 |
| whirling bit | 偏心回转钻头 |
| wicker stab | 锯齿形插头 |
| winding unit | 卷取头；卷取单元 |
| wing union | 翼状活接头 |
| winged scraping bit | 刮刀钻头 |
| winged substitute | 十字形接头 |
| wire line core bit | 绳索取心钻头 |
| wire line thimble | 绕扎钢丝绳头用的长圆形铁环 |
| wire-line bit | 钢丝绳起下的钻头 |
| wireline adapter | 钢丝绳接头 |
| wireline knuckle joint | 钢绳绞链接头 |
| workover swivel | 修井用水龙头 |
| wrench flat | 接头上搭扳手的平面 |
| wrist pin spool | 曲柄销猫头 |
| write head | 写入磁头 |
| X-over | 转换接头 |
| XCONN | 十字接头；交叉连接 |
| XDP | X射线密度探头 |
| XO sub | 大小头 |
| XO | 转换接头 |
| y splice | 分叉接头 |
| Y-joint | Y形接头 |
| Y-junction | Y形接头 |
| yaw angle | 船头摆角；偏航角 |
| yaw | 头尾摆动 |
| zoom | 陡直上升；调整自由焦距镜头；图象电子放大；免费的；嗡嗡声 |
| zoomer | 可变焦距摄影机镜头 |
| zublin bit | 独牙轮钻头 |
| zublin differential bit | 差异式独牙轮钻头 |