| abnormal fanshaped fold | 逆扇状褶皱 |
| accordant fold | 谐调褶皱 |
| accordion fold | 手风琴状褶皱 |
| active folding | 活动褶皱 |
| adpressed fold | 紧压褶皱 |
| aerial fold | 剥蚀褶皱 |
| air holder | 空气罐 |
| alarm threshold | 报警门限 |
| alkyd molding compounds | 醇酸模塑料 |
| allochthonous fold | 异地褶皱 |
| allogene fold | 异地褶皱 |
| Alpine fold | 阿尔卑斯褶皱 |
| ameboid fold | 无定形褶皱 |
| anchor holding capacity | 锚抓力 |
| angle holding assembly | 稳斜钻具组合 |
| angle holding BHA | 稳斜底部钻具组合 |
| angular fold | 尖棱褶皱 |
| anomaly threshold | 异常下限 |
| anticlinal fold | 背斜型褶曲 |
| antiformal first fold | 第一期背形褶皱 |
| antiformal fold | 背形褶皱 |
| appressed fold | 两翼封闭的褶皱 |
| arch fold | 拱形褶皱 |
| archedup fold | 背斜褶皱 |
| arrival manifold | 入口汇管 |
| associated fold | 共轭褶皱 |
| asymmetric fold | 不对称褶皱 |
| autochthonous fold | 原地褶皱 |
| autoclave molding | 热压罐成型 |
| automatic mold | 自动模 |
| axial plane folding | 轴面褶皱 |
| Atype fold | A型褶皱 |
| B-type fold | B-型褶皱 |
| back-up control manifold | 辅助控制管汇 |
| backfolding | 背向褶皱 |
| backward folding | 背向褶皱作用 |
| bamboo scaffolding | 竹脚手架 |
| basement folding | 基底褶皱作用 |
| basin-like fold | 盆地形褶皱 |
| beacon scaffold | 觇标 |
| belt of folded strata | 褶皱带 |
| bend folding | 隆曲褶皱 |
| bend-glide folding | 曲滑褶皱 |
| bending fold | 隆曲褶皱 |
| bi-directional folded-type prover system | 双向折叠型标定系统 |
| bit holder | 钻头夹持器 |
| black gold of Transylvania | 石油 |
| black gold | 石油 |
| block folding | 块断褶皱作用 |
| blow molded bottle | 吹塑瓶 |
| blow molding | 吹塑 |
| bold relief | 粗糙地形 |
| boldface | 黑体 |
| bondholder | 债券持有人 |
| bottom hold down | 井底防上滑器；底部压住 |
| bottom layer fold | 底层褶皱 |
| bounce mold | 弹跳模 |
| box fold | 箱式褶皱 |
| box-like fold | 箱状褶皱 |
| brachy-anticlinal fold | 短背斜褶皱 |
| brachy-anticline fold | 短轴背斜褶皱 |
| brachy-synclinal fold | 短轴向斜褶皱 |
| brachyfold | 短轴褶皱 |
| bracket scaffold | 悬臂式脚手架 |
| breathholding | 屏气 |
| broad fold | 开阔褶皱 |
| broken fold | 破裂褶皱 |
| brush holder | 炭刷架 |
| buckle fold | 弯曲褶皱 |
| buckle folding | 弯曲褶皱作用 |
| build and hold wellbore | 增斜-稳斜 |
| bulk molding compound | 预制整体塑料 |
| bulk molding compounds | 整体模塑料 |
| burette holder | 滴定管架 |
| button-type hold down | 钮式油管锚 |
| by-pass manifold | 旁通管汇 |
| Caledonian fold | 加里东褶皱 |
| canoe fold | 舟状褶皱 |
| cargo hold | 货舱 |
| carinate fold | 脊状褶皱 |
| cascade fold | 滑落褶皱 |
| casing hold-down ring | 套管压紧环 |
| central manifold | 中心管汇 |
| centre gated mold | 中心供料模 |
| centroclinal fold | 向心褶皱 |
| chain folded structure | 链折叠结构 |
| chart holder | 压力卡片筒 |
| chevron fold | 尖顶褶皱 |
| chevron-style fold | 尖顶式褶皱 |
| chip hold down effect | 压持效应 |
| chip hold down | 压持作用 |
| choke holder | 节流器 |
| choke manifold | 节流管汇 |
| choke-line manifold | 节流管汇 |
| chromatic threshold | 色阈 |
| chromeplated mold | 镀铬模具 |
| circular conical fold | 圆锥形褶皱 |
| cleavage fold | 劈理褶皱 |
| close fold | 闭合褶皱 |
| closed fold | 闭合褶皱 |
| closed mold molding | 闭合模模塑 |
| coil holder | 线圈座 |
| cold area | 冷区 |
| cold bath | 冷浴 |
| cold belt | 寒带 |
| cold bend test | 冷弯试验 |
| cold box | 冷箱 |
| cold brittleness | 冷脆性 |
| cold cap | 寒带 |
| cold catch pot | 低温截液罐 |
| cold cathode | 冷阴极 |
| cold check test | 冷检查试验 |
| cold clearance | 冷时间隙 |
| cold cracking sensitivity | 冷裂敏感性 |
| cold cracking | 低温开裂 |
| cold cranking simulator | 冷起动模拟器 |
| cold cross-section | 冷中子截面 |
| cold curing paint | 低温固化涂料 |
| cold current | 寒流 |
| cold drawing oil | 冷拔油 |
| cold drawing | 冷拉；冷拉伸 |
| cold drawn bar | 冷拉钢筋 |
| cold eddy | 冷涡 |
| cold elbow | 冷弯弯头 |
| cold emission | 冷发射 |
| cold expanding | 冷胀 |
| cold extraction | 冷提取 |
| cold filter clogging temperature | 冷滤点 |
| cold finger | 冷凝管 |
| cold flow point | 冷流点 |
| cold flow | 冷流；冷塑加工 |
| cold forging | 冷锻 |
| cold forming process | 冷成型 |
| cold grinding | 冷磨 |
| cold hardiness | 耐寒力 |
| cold header | 冷锻机 |
| cold heading | 冷锻 |
| cold junction compensation | 冷端温度补偿 |
| cold kill | 冷却收缩损坏 |
| cold light | 冷光 |
| cold loess | 冷黄土 |
| cold molding | 冷塑 |
| cold neutron | 热下中子 |
| cold pinch | 冷态压扁 |
| cold pole | 寒极 |
| cold polymerization | 低温聚合 |
| cold polymerized styrene-butadiene rubber | 冷聚丁苯橡胶 |
| cold pressing | 低温压榨 |
| cold pressure welding | 冷压焊 |
| cold reflux | 冷回流 |
| cold resistance | 抗冷性 |
| cold resonance | 冷电子管回路谐振 |
| cold riveting | 冷铆 |
| cold rolling | 冷轧 |
| cold sector | 冷区 |
| cold separator | 低温分离器 |
| cold service | 低温作用 |
| cold set | 冷固化 |
| cold setting adhesive | 常温固化胶粘剂 |
| cold settler | 低温沉淀器 |
| cold short material | 冷脆材料 |
| cold short | 冷脆 |
| cold shortness | 冷脆性 |
| cold spell | 寒潮 |
| cold spot | 冷点 |
| cold stacked | 停用搁置 |
| cold start | 冷起动 |
| cold starting performance | 低温起动性能 |
| cold storage | 冷藏库 |
| cold stretch | 冷拉 |
| cold stripper | 冷汽提塔 |
| cold swaging | 冷锻 |
| cold test | 耐低温试验 |
| cold trap | 冷阱 |
| cold wash | 冷洗 |
| cold waste | 低放射性废物 |
| cold water injection | 注冷水 |
| cold waterflooding | 冷水驱油 |
| cold wave | 寒流 |
| cold welding | 冷焊合 |
| cold working | 冷加工 |
| cold-applied coating | 常温涂敷涂层 |
| cold-bending machine | 冷弯弯管机 |
| cold-bending | 冷弯 |
| cold-cathode counter | 冷阴极计数管 |
| cold-cathode rectifier | 冷阴极整流管 |
| cold-cathode tube | 冷阴极管 |
| cold-metal work | 白铁工 |
| cold-molding | 冷压 |
| cold-press | 冷压 |
| cold-rolled thread root | 冷作螺纹根 |
| cold-rolled | 冷轧的 |
| cold-test oil | 低凝点石油 |
| cold-wall slide valve | 冷壁滑阀 |
| cold-water drive | 冷水驱动 |
| cold-weather construction | 冬季施工 |
| cold-weather lubrication | 冷天润滑 |
| cold-weather pipelining | 冬季管道输油；冬季管道敷设 |
| cold-working steel | 冷作钢 |
| cold-zone | 冷区 |
| color difference threshold | 色差阈 |
| common shareholder | 普通股股东 |
| common stockholder | 普通股股东 |
| compaction fold | 压实褶皱 |
| competent folding | 强褶皱作用 |
| complete fold | 全形褶皱 |
| complex fold | 复褶皱 |
| complex multifolded layer | 复式褶皱的复杂层 |
| composite fold | 复合褶皱 |
| composite mold | 多腔塑模 |
| compound fold | 复合褶皱 |
| compression molding | 压缩模塑 |
| concentric fold | 同心褶皱 |
| concertina fold | 棱角褶皱 |
| concordant fold | 整合褶皱 |
| conformable fold | 整合褶皱 |
| congruent drag fold | 同斜拖曳褶皱 |
| congruous fold | 同斜褶皱 |
| conic fold | 圆锥形褶皱 |
| conjugate fold | 共轭褶皱 |
| constricted fold | 收缩褶皱 |
| contact pressure molding | 接触加压模塑 |
| contemporaneous fold | 同生褶皱 |
| contorted fold | 扭曲褶皱 |
| contortion folding | 扭曲褶皱作用 |
| control manifold | 控制管汇 |
| converged fold | 收敛褶皱 |
| converging fold belt | 辐合褶皱带 |
| convolute fold | 旋卷形褶皱 |
| core holder | 岩心夹持器 |
| core holding unit | 岩心夹持器 |
| cost of goods sold | 售出产品成本；销售成本 |
| counting threshold | 计数阈 |
| critical Reynolds number | 临界雷诺数 |
| cross fold | 横褶皱 |
| cryptodiapiric fold | 隐底辟褶皱 |
| cupholder | 杯式绝缘子螺脚 |
| curvilinear fold | 曲线形褶皱 |
| cuspate fold | 尖顶褶皱 |
| cuttings hold-down effect | 岩屑压持效应 |
| dead fold | 残余褶皱；死褶 |
| deceptive fold | 假褶皱 |
| deflection fold | 转向褶皱 |
| depth molded | 型深 |
| depth of folding | 褶皱深度 |
| detection threshold | 检测阀 |
| dextral fold | 右移褶皱 |
| diapir fold | 底辟褶皱 |
| diapiric fold | 底辟褶皱 |
| dip blow molding | 蘸料吹塑 |
| dip fold | 倾向褶皱 |
| dip molding | 浸渍模塑 |
| dipping fold | 倾向褶皱 |
| discharge manifold | 卸油管汇 |
| discordant fold | 不整合褶皱 |
| discordant folding | 不整合褶皱 |
| discrimination threshold | 甄别阈 |
| dish gas-holder | 湿式气柜 |
| disharmonic folding | 不谐合褶皱作用 |
| disjunctive fold | 碎裂褶皱 |
| displaced fold | 异地褶皱 |
| disrupted fold | 断裂褶皱 |
| distributing manifold | 分配管汇 |
| divided manifold | 分支管汇 |
| doldrums | 赤道无风带 |
| dolomold | 白云石晶模；白云石穴 |
| dolomoldic chert | =dolocast |
| dome fold | 穹状褶皱 |
| double folding | 双重褶皱作用 |
| double plunging fold | 双倾伏褶皱 |
| doubly plunging fold | 双倾伏褶皱 |
| downfold | 向斜 |
| drag fold | 拖曳褶皱 |
| drape fold | 披盖褶皱 |
| drape-like fold | 披盖式褶皱 |
| drikold | 固体二氧化碳 |
| dry cargo hold | 干货舱 |
| dry seal gas holder | 干式气柜 |
| dry-wick solder remover | 干绳焊锡清除器 |
| dynamic chip hold-down effect | 动压制钻屑效应 |
| dynamic hold-down | 动压制 |
| décollement fold | 滑脱褶皱 |
| echelon folding | 雁行褶皱作用 |
| echelon folds | 雁行褶皱 |
| ecologic threshold | 生态临界 |
| edgefold | 折边 |
| effluent holding reservoir | 污水储池 |
| ejective fold | 隔挡褶皱 |
| electric soldering iron | 电烙铁 |
| electrode holder | 焊条夹钳 |
| elongated fold | 纵长褶皱 |
| en echelon fold | 雁形褶皱 |
| epidermic fold | 表层褶皱 |
| erect fold | 直立褶皱 |
| exhaust manifold | 排出管汇 |
| expansion fold | 膨胀褶皱 |
| extrusion molding | 挤塑 |
| false folding | 假褶皱作用 |
| family mold | 集成塑模 |
| fan fold | 扇状褶皱 |
| fan-shaped fold | 扇状褶皱 |
| fan-type fold | 扇形褶皱 |
| fanfold paper | 扇形折纸 |
| fault fold | 断层褶皱 |
| fault-fold structure | 断层-褶皱构造 |
| fault-folding | 断层-褶皱 |
| faulted fold | 断裂褶皱 |
| faulted overfold | 断裂倒转褶皱 |
| faulted upfold | 断裂隆起褶皱 |
| faulty soldered joint | 不良的焊接接缝 |
| film holder | 软片匣 |
| first-order fold | 一级褶皱 |
| first-phase fold | 第一期褶皱 |
| flame holder | 火焰稳定器 |
| flameholding | 火焰稳定 |
| flat-topped fold | 平顶褶皱 |
| flexural fold | 弯曲褶皱 |
| flexural slip fold | 曲滑褶皱 |
| flexure flow fold | 弯曲滑流褶皱 |
| flexure fold | 挠曲褶皱 |
| flow flexure fold | 流动挠曲褶皱 |
| flow fold | 流状褶皱 |
| flowage fold | 流动褶皱 |
| flowing gold | 原油 |
| fold amplitude | 褶皱幅度 |
| fold arc | 褶皱弧 |
| fold axis | 褶皱轴 |
| fold basin | 褶皱盆地 |
| fold belt | 褶皱带 |
| fold breccia | 褶皱角砾岩 |
| fold building | 褶皱构造 |
| fold closure | 褶皱闭合度 |
| fold episode | 褶皱幕 |
| fold fault | 褶皱断层 |
| fold filling | 软折叠管装油 |
| fold hinge | 褶皱枢纽 |
| fold morphology | 褶皱形态 |
| fold mountain | 褶皱山 |
| fold movement | 褶皱运动 |
| fold nappe | 褶皱推覆体 |
| fold plagisyenite | 副长石斜长正长岩 |
| fold resistance | 抗折叠性 |
| fold set | 褶皱组 |
| fold structure | 褶皱构造 |
| fold style | 褶皱型式 |
| fold system | 褶皱系 |
| fold train | 褶皱列 |
| fold | 褶皱 |
| fold-back | 对折电缆；混合 |
| fold-modified | 褶皱变形的 |
| fold-pluge | 褶皱倾没 |
| fold-thrust | 褶皱冲断层 |
| fold-wedge | 褶皱楔体 |
| foldcarpet | 褶皱盖层 |
| folded belt | 褶皱带 |
| folded chain | 褶皱山脉 |
| folded doming-up region | 隆褶区 |
| folded downwarping region | 拗褶区 |
| folded fault | 褶皱断层 |
| folded filter | 放在漏斗上的折叠滤纸 |
| folded fold | 重褶褶皱 |
| folded region | 褶皱区 |
| folded section | 褶皱剖面 |
| folded structure | 褶皱构造 |
| folded substructure | 底层褶皱构造 |
| folded tectogene | 褶皱构造带 |
| folded thrust | 褶皱冲断层 |
| folded trap | 褶皱圈闭 |
| folded zone | 褶皱带 |
| folded | 褶曲的 |
| folded-plate | 折板 |
| folder | 文件夹；折叠式地图；折叠式表格；折叠器；折叠者 |
| folding boat | 折叠艇 |
| folding bobbin | 并线筒子；并丝筒子；并纱筒子 |
| folding derrick | 折叠式井架 |
| folding fissure | 褶皱裂缝 |
| folding frequency | 折叠频率 |
| folding horst | 褶皱地垒 |
| folding machine | 折纸机 |
| folding nappe | 褶皱推复体 |
| folding period | 褶皱期 |
| folding phase | 褶皱幕 |
| folding tank | 可折叠罐 |
| folding tectonics | 褶皱构造 |
| folding theorem | 折叠定理 |
| folding wave number | 折叠波数 |
| folding | 褶皱作用；迭；折叠的 |
| foldout | 折页 |
| foldover | 折叠 |
| foothold | 立足点；据点 |
| forced folding | 强制褶皱 |
| foreland fold | 前陆褶皱 |
| foundation folding | 基底褶皱 |
| framing scaffold | 脚手架 |
| fuel manifold | 燃料总管 |
| gas generation threshold | 生气门限 |
| gas holder bell | 气柜钟罩 |
| gas holder | 气柜 |
| gas holdup | 气体停滞 |
| gas storage holder | 气罐 |
| gas-holder bell | 气罐罩顶 |
| gas-holder | 储气罐 |
| Geiger threshold voltage | 盖革阈电压 |
| general meeting of shareholders | 股东大会 |
| generalized particle Reynolds number | 综合颗粒雷诺数 |
| generalized Reynolds number | 广义雷诺数 |
| generative fold | 增长褶皱 |
| gentle asymmetric fold | 平缓不对称褶皱 |
| gentle folding | 平缓褶皱作用 |
| geosynclinal folded system | 地槽褶皱系 |
| geosynclinal folding | 地槽褶皱作用 |
| geosyncline fold buildings | 地槽褶皱组合体 |
| gleitbrett fold | 滑褶皱 |
| glide fold | 滑褶皱 |
| gold coating | 镀金 |
| gold reserve | 黄金储备 |
| gold rush approach | 蜂涌而至法 |
| gold standards | 金本位 |
| gold | 金；财富；金色；包金材料；金制的；含金的；金色的 |
| gold-palladium coating | 金-钯镀层 |
| golden section | 黄金分割 |
| grip holder | 夹头 |
| ground hold | 泊船具 |
| gushing gold | 石油 |
| handhold | 手把；摇杆 |
| hard soldering | 用硬焊料焊接 |
| harmonic folding | 谐合褶皱 |
| Hercynian fold belt | 海西褶皱带 |
| heteroaxial fold | 异轴褶皱 |
| high-energy threshold | 高能阈 |
| hold angle | 稳斜 |
| hold back vessel | 牵制船 |
| hold batten | 货舱护条 |
| hold down groove | 固定槽 |
| hold good | 有效 |
| hold ladder | 舱口梯 |
| hold on lease | 租借 |
| hold on to | 拉住 |
| hold out swing | 外推式变向架 |
| hold out | 提出 |
| hold over | 延期 |
| hold pattern | 稳斜模式 |
| hold stanchion | 舱内支柱 |
| hold the market | 垄断市场 |
| hold transverse | 舱口横材 |
| hold true | 有效；适用 |
| hold water | 滴水不漏；无懈可击 |
| hold well | 舱内水沟；污水井 |
| hold | 握住 |
| hold-back rope | 缓冲绳 |
| hold-down finger | 防止上顶的爪簧 |
| hold-down packer | 悬挂式封隔器 |
| hold-down ring | 压紧环 |
| hold-down slip | 防止上移的卡瓦 |
| hold-down | 压住 |
| hold-in swing | 内拉式变向架 |
| hold-up capacity | 滞留容量 |
| hold-up time | 滞留时间 |
| hold-up vessel | 储存罐 |
| hold-up volume | 滞留体积 |
| hold-up | 举起 |
| holdback | 抑制 |
| holder angle | 焊把角度 |
| holder in due course | 短期持票人 |
| holder lift | 储气柜钟罩 |
| holder manipulation | 焊把操作 |
| holder | 夹 |
| holdfast | 支架；夹 |
| holding assembly | 稳斜组合 |
| holding capacity | 容量 |
| holding company | 股权公司 |
| holding force | 夹持力 |
| holding oxidant | 支持氧化剂 |
| holding power | 握力 |
| holding signal | 保持信号 |
| holding strategy | 保持策略 |
| holding tank | 收集罐 |
| holding temperature | 维温温度 |
| holding time | 保留时间 |
| holding vessel | 集油油轮 |
| holding | 保持 |
| holdup factor | 悬持系数 |
| holdup | 持率 |
| homoaxial fold | 同轴褶皱 |
| horizontal fold | 水平褶皱 |
| horizontal inclined fold | 水平倾斜褶皱 |
| horizontal normal fold | 水平正常褶皱 |
| hot runner mold | 热流道塑模 |
| household registration | 户口登记 |
| household | 家庭；家 |
| hydranlic tubing holddown | 油管水力锚 |
| hydraulic hold-down | 水力锚 |
| ice-cold | 冰冷的 |
| identification threshold | 鉴定阈 |
| incipient fold | 初始褶皱 |
| inclined fold | 倾斜褶皱 |
| incoming-stream manifold | 进液管汇 |
| incompetent fold | 弱褶皱 |
| incongruous drag fold | 异向拖曳褶皱 |
| incongruous fold | 异向褶皱 |
| inconstant fold | 不稳定褶皱 |
| independent fold1 | 独立褶皱 |
| induced fold | 派生褶皱 |
| inequant fold | 不等翼褶曲 |
| injection blow molding | 注射吹塑 |
| injection flolding | 贯入褶皱作用 |
| injection manifold | 注入管汇 |
| injection mold | 注射塑模 |
| injection molding | 注塑 |
| inlet manifold | 进口管汇 |
| inner fold arc | 内褶皱弧 |
| intake manifold | 进口管汇 |
| interfolding | 混合褶皱作用 |
| internal mold | 内模 |
| internal toold calibration | 仪器内刻度 |
| interpass cold lap | 焊道内冷搭接 |
| interrupted fold | 不连续褶皱 |
| intracontinental linear fold belt | 陆内线状褶皱带 |
| intraformational folding | 层内褶皱 |
| intraformational recumbent fold | 层内伏卧褶皱 |
| inverted fan fold | 倒扇状褶皱 |
| isoclinal fold | 同斜褶皱 |
| jet holder | 喷丝头座 |
| jet molding | 注塑；喷射模塑 |
| joint leasehold | 联合租用 |
| julgoldite | 复铁绿纤石 |
| kill manifold | 压井管汇 |
| kink fold | 膝折褶皱 |
| knee fold | 膝曲褶皱 |
| lampholder | 灯座 |
| land holder | 土地持有者 |
| large-scale fold | 大型褶皱 |
| latitudinally-trending fold | 纬向褶皱 |
| leasehold interest | 租赁权益 |
| leasehold | 租借的；借地权 |
| level fold | 水平褶皱 |
| linear fold | 线状褶皱 |
| liquid holdup | 截面含液率 |
| load fold | 负载褶皱 |
| longitudinal fold | 纵褶皱 |
| low fold stack | 低次叠加 |
| low pressure molding | 低压模塑 |
| low-amplitude paleofold | 小幅度古褶皱 |
| low-pressure manifold | 低压管汇 |
| lower apex of fold | 褶皱下顶 |
| luminescence threshold | 发光阈 |
| lying fold | 伏卧褶皱 |
| lying overfold | 伏褶皱 |
| macrofold | 宏观褶皱 |
| major fold | 主褶皱 |
| major folded zone | 大褶皱带 |
| majority share holding | 多数股权 |
| manifold building | 管汇间 |
| manifold center | 管汇中心 |
| manifold cycles | 多次循环 |
| manifold header | 集管头 |
| manifold pressure | 管汇压力 |
| manifold trailer | 管汇拖车 |
| manifold truck | 管汇车 |
| manifold valve | 管汇阀组；多支管阀 |
| manifold | 总管；多支管 |
| mantle fold | 盖层褶皱 |
| manyfold | 许多倍 |
| marginal fold | 边缘褶皱；附加褶皱 |
| master hydraulic control manifold | 总液压控制管汇 |
| matched-die molding | 合模模塑 |
| median fold | 中隆 |
| menifold | 岐管 |
| mesofold | 中型褶皱 |
| microfolding | 微褶皱作用 |
| minor fold | 小褶皱 |
| minor partial fold | 小型局部褶皱 |
| minority share holding | 少数股权 |
| minority shareholders | 少数股东 |
| mitre-fold | 斜接褶皱 |
| mold lubricant | 塑模润滑剂 |
| mold release agent | 脱模剂 |
| mold release | 脱模剂 |
| mold shrinkage | 模塑收缩 |
| mold | 模 |
| mold | 模具 |
| moldability | 可模制性 |
| moldable polyester | 可模塑聚酯 |
| moldavite | 黑地蜡 |
| moldboard | 模板 |
| molded breadth | 型宽 |
| molded laminate | 模塑层压制品 |
| molded plastic tank | 塑料模制罐 |
| molded resin | 模制树脂 |
| molder | 铸工；制模工；模；毛轧机 |
| moldic pore | 印模孔隙 |
| moldic porosity | 印膜孔隙性 |
| molding compounds | 模塑料 |
| molding cycle rate | 模型循环速率 |
| molding cycle | 模塑周期 |
| molding index | 模塑指数 |
| molding pressure | 模塑压力 |
| molding shrinkage | 模后收缩 |
| molding | 模制；塑造 |
| moldovite | 石蜡 |
| monoclinal fold scarp | 单褶崖 |
| monoclinal fold | 单斜褶皱 |
| mountain folding | 造山作用 |
| multifold coverage | 多次覆盖 |
| multifold line | 多次覆盖测线 |
| multifold profiling | 多次覆盖剖面法 |
| multifold | 多样的 |
| multilayered fold | 多层褶皱 |
| multiple connection manifold | 多路管汇 |
| multiple fan-shaped fold | 复扇形褶皱 |
| multiple fold | 复合褶皱 |
| multisphere gas holder | 多球形储气罐 |
| multistabilizer holding assembly | 多稳定器稳斜组合 |
| mushroom fold | 蘑菇式褶皱 |
| n-fold coverage | n次覆盖 |
| n-fold pole | n阶极点 |
| n-fold shooting | n次激发 |
| n-fold stack | n次叠加 |
| neutron source holder | 中子源夹持器 |
| non-plunging fold | 非倾伏褶皱 |
| nonlinear fold region | 非线状褶皱区 |
| nonsequent folding | 不连续褶皱 |
| normal fold | 正常褶皱；对称褶皱 |
| nose of fold | 褶皱鼻 |
| nose-type fold | 鼻型褶皱 |
| nozzle holder | 喷嘴座 |
| null manifold | 零流形 |
| oblique flexural-slip fold | 斜挠曲滑动褶皱 |
| oblique fold | 斜褶皱 |
| oblique shear fold | 斜剪切褶皱 |
| oil cold test | 石油产品浊点或凝固点测定 |
| oil hold | 油舱 |
| oil holdup | 持油率 |
| oil manifold | 分、集油管组 |
| oil threshold | 生油门限 |
| old channel | 古河道 |
| old course | 古河道 |
| old drift | 古冲积层 |
| old forms | 古地形 |
| old hand | 老油矿工 |
| old oil =old crude | 老油 |
| Old Red Sandstone series | 老红砂岩统 |
| old shoreline | 古滨线 |
| Old Stone Age | 旧石器时代 |
| old total depth | 原油井深度 |
| old upland | 古高地 |
| old well plugged back | 老井封堵 |
| old well worked over | 老井大修 |
| old | 老年的；古代的；陈旧的；古时；旧事物 |
| old-well deeper drilling | 老油井加深钻井 |
| Oldham coupling | 欧氏联轴节 |
| oldiron | 废铁 |
| oldlake | 老年湖；萎缩湖 |
| Olduvai event | 奥杜瓦地磁事件 |
| oolimold | 空鲕粒 |
| oomold | 鲕状穴 |
| oomoldic carbonate | 鲕模状碳酸盐岩 |
| oomoldic chert | 鲕模状燧石 |
| oomoldic | 鲕穴状的 |
| open fold | 敞开褶皱 |
| open-type fold | 开口褶皱 |
| opposite fold limbs | 反向褶皱翼 |
| oriented manifold | 定向流形 |
| orifice holder | 孔板固定装置 |
| oroclinal folding | 弯移褶皱 |
| outfold | 倒转褶皱 |
| outgoing manifold | 发送管汇 |
| overfold | 倒转褶皱 |
| overlap fold | 超覆褶皱 |
| oversold position | 空头 |
| overthrown fold | 倾倒褶皱 |
| overthrust fold | 倒转褶皱 |
| overturned fold | 倒转褶皱 |
| Palaeozoic fold belt | 古生代褶皱带 |
| paleofold amplitude | 古褶皱辐度 |
| paleofold | 古褶皱 |
| palladium-gold | 钯金合金 |
| parallel fold | 平行褶皱 |
| parasitic fold | 寄生褶皱 |
| paratectonic fold | 副构造型褶皱 |
| passive fold | 被动褶皱 |
| peak-and-hold | 峰值保持 |
| peak-holding circuit | 峰值保持线路 |
| penecontemporaneous fold | 准同生褶皱 |
| periclinal fold | 穹状褶皱 |
| peripheral foolding | 边缘注水 |
| photoelectric threshold | 光电阈 |
| pickholder | 截齿座 |
| piedmont fold | 山麓褶皱 |
| piercing fold | 刺穿褶皱 |
| pin bold | 带开口销螺栓 |
| pinched fold | 提尖褶皱 |
| pipe holder | 管子支架 |
| pipe manifold valves | 梳形分配阀组 |
| pipe manifold | 分叉管；梳形管 |
| pipe scaffolding | 管子脚手架 |
| piping manifold | 管道分叉管组 |
| pitching fold | 倾伏褶皱 |
| platformal fold belt | 台褶带 |
| plumber's solder | 铅锡焊料 |
| plunger molding | 柱塞模塑 |
| plunging fold | 倾伏褶皱 |
| plunging normal fold | 倾伏对称褶皱 |
| polder | 新辟的低地 |
| policy holder | 保险客户 |
| polyclinal fold | 多斜褶皱 |
| porous mold | 多孔模 |
| positive mold | 正压塑模 |
| post-depositional folding | 沉积后褶皱作用 |
| post-folding uplift | 褶皱作用后隆重起 |
| post-unconformity folding | 不整合期后褶皱作用 |
| posthumous fold | 复活褶皱 |
| powder metal molding | 粉末金属模铸 |
| precipitation threshold | 沉淀度；临界沉淀点 |
| prefolding | 褶皱前的 |
| pressure manifold | 压力管汇 |
| principal fold | 主褶皱 |
| principal shareholder | 主要股东 |
| production manifold | 采油管汇 |
| progressive fold development | 褶皱的逐渐发展 |
| prominent fold | 主褶皱 |
| proof cold chain | 耐冷链条 |
| protogeosynclinal fold belt | 原地槽褶皱带 |
| pseudoconcentric fold | 假同心褶皱 |
| Ptigmatic folding | 肠状褶皱 |
| pump manifold | 泵的管汇 |
| quaquaversal fold | 穹状褶皱 |
| quasi-flexural fold | 拟挠曲褶皱 |
| quick solder | 速熔焊料 |
| re-entrant mold | 侧凹模 |
| real fold | 真褶皱 |
| receiving manifold | 采油管汇 |
| reciprocal holdings | 相互控股 |
| reclined fold | 斜卧褶皱 |
| rectangular fold | 长方形褶皱 |
| recumbent infold | 伏卧 褶皱 |
| recumbent overfold | 倒转伏褶皱 |
| recumbent overturned fold | 几乎水平的倒转褶皱；伏卧褶皱 |
| recurrent folding | 重复褶皱作用 |
| reflexed fold | 倒转褶皱 |
| refolded antiform | 重褶背形 |
| refolded fold | 重褶褶皱 |
| refolding of cell | 容器 的折叠 |
| refolding | 重褶皱作用 |
| regional threshold | 区域异常下限 |
| relief holder | 平衡气罐 |
| remote manifold | 遥控管汇 |
| renewed folding | 重新褶皱作用 |
| repeated folding | 重复褶皱 |
| resold | 倒卖 |
| returned fold | 倒转褶皱 |
| reverse-flowage fold | 逆向流褶皱 |
| reversed fold | 倒转褶皱 |
| reversed fold-fault | 逆褶断层 |
| revived folding | 重复褶皱作用 |
| Reynold's number | 雷诺准数 |
| Reynolds lubrication equation | 雷诺润滑方程式 |
| Reynolds model law | 雷诺模型律 |
| Reynolds number | 雷诺数 |
| Reynolds numeber | 雷诺数 |
| Reynolds.criterion | 雷诺准则 |
| rheid fold | 流变褶 |
| rheomorphic fold | 流变褶皱 |
| ridge-like fold | 脊状褶皱 |
| rigid holding assembly | 刚性稳斜组合 |
| rod holder | 抽油杆夹持器 |
| roll fold | 波动褶皱 |
| rooted fold | 原地褶皱 |
| rotary molding | 转台模塑 |
| rotational fold | 扭转褶皱 |
| rotomolding | 滚塑 |
| rounded fold | 圆形褶皱 |
| rudimentogeosynclinal fold belt | 雏地槽褶皱带 |
| rug fold | 皱式褶皱 |
| runnerless injection molding | 无流道赘物注射模塑 |
| S-fold | S-形褶皱 |
| saddle fold | 鞍状褶皱 |
| sample holder | 试样夹 |
| sampling hold circuit | 采样保持电路 |
| sand mold casting | 砂型浇铸 |
| sand mold | 砂型 |
| scabbard fold | 剑鞘褶皱 |
| scaffold | 脚手架；搭棚 |
| second-order fold | 次级褶皱 |
| second-phase fold | 第二幕褶皱 |
| secondary fold | 次生褶皱 |
| seedholder | 籽晶夹持器 |
| sequence of folds | 褶皱序列 |
| shareholder | 股东 |
| shareholding ratio | 持股比例 |
| shareholding | 持股 |
| sharp fold | 急斜褶皱 |
| shear fold | 剪褶皱 |
| sheet molding compound | 片状成型料 |
| sheet-holder | 纸夹 |
| sigmoidal fold | S形褶皱 |
| silver soldering | 银焊 |
| similar fold | 相似褶皱 |
| similar folding | 相似褶皱作用 |
| simultaneous cross-folding | 同时交叉褶皱作用 |
| single fold continuous profile | 单次连续剖面 |
| single fold | 单次覆盖 |
| single-layer fold | 单层褶皱 |
| sinistral fold | 左旋褶皱 |
| sinter molding | 熔结模塑；烧结模塑 |
| sinusoidal fold | 正弦曲线状褶皱 |
| six-fold coverage | 六次覆盖 |
| skid-mounted manifold | 橇装管汇 |
| slip fold | 滑褶皱 |
| slump fold | 滑动褶皱 |
| slush molding | 中空成型 |
| smolder | 熏烧；闷烧；闷火 |
| soft solder | 软焊料 |
| sold on | 热衷于 |
| solder bead | 焊点 |
| solder connection | 焊接 |
| solder glass method | 熔融玻璃胶结法 |
| solder resist | 阻焊 |
| solder strip | 焊带 |
| solder | 焊料 |
| soldered joint | 焊接头 |
| soldering iron | 焊铁 |
| soldering | 锡焊 |
| solderless | 无焊料的 |
| soldier | 战士；木片；竖桩 |
| solvent hold-up | 溶剂滞留 |
| spectrum unfolding | 解谱 |
| spinneret holder | 喷丝板座 |
| spinning manifold | 纺丝箱休 |
| split ring mold | 瓣合模；组合模 |
| spring sheet-holder | 弹簧定位销 |
| squeeze manifold | 挤压管汇 |
| stacking fold | 叠加次数 |
| static chip hold down pressure | 压住钻屑的静压力 |
| static hold-down | 静压制 |
| steel bar cold draw | 钢筋冷拔 |
| steeply plunging fold | 陡倾伏褶皱 |
| steeply-folded anticline | 急褶皱背斜 |
| step fold | 阶状褶皱 |
| stockholder | 股东 |
| stockholder's equity | 股东权益 |
| stockholder's right | 股东权利 |
| stockholders' meeting | 股东大会 |
| stokehold | 锅炉舱；炉前 |
| stop fold | 陡斜褶皱 |
| strain-slip folding | 滑动褶皱 |
| streamline molded form | 流线形地形 |
| strike fold | 走向褶皱 |
| stronghold | 要塞；根据地 |
| stylus holder | 记录笔托架 |
| sub-threshold spectrum | 次阈值光谱 |
| subisocline fold | 准等斜褶皱 |
| submanifold | 子簇 |
| subsea manifold center | 海底管汇中心 |
| subsea manifold | 水下管汇 |
| subsequent fold | 后成褶皱 |
| successive fold episodes | 连续褶皱幕 |
| suction manifold | 吸入管汇 |
| sunsidiary fold | 次级褶皱 |
| superficial fold | 表层褶皱 |
| superimposed fold | 叠加褶皱 |
| superposed fold | 叠加褶皱 |
| supratenuous fold | 同沉积褶皱 |
| surface folding | 地面褶皱 |
| suspended fold | 悬挂褶皱 |
| suspended scaffolding | 悬式脚手架 |
| symmetrical fold | 对称褶皱 |
| synclinal fold | 向斜褶皱 |
| syndepositional fold | 同沉积褶皱 |
| talmi gold | 镀金黄铜 |
| tank manifold valve | 油罐阀汇 |
| tank manifold | 油罐管汇 |
| tanker stokehold | 油轮火舱 |
| telescopic gas holder | 套筒式储气柜 |
| telescopic type wet gas holder | 套筒式湿式气柜 |
| tensional basement fold | 张性基底褶皱 |
| test manifold | 测试管汇 |
| testing manifold | 测试管汇 |
| thick molding compound | 厚模塑料 |
| thin-walled injection molding | 薄壁注塑 |
| three-fold block | 三轮滑车 |
| threefold division | 三分法 |
| threefold symmetry | 三次对称 |
| threefold | 三倍的 |
| threshold aging period | 极限老化期 |
| threshold bit weight | 门限钻压 |
| threshold capillary pressure of penetration | 毛细渗透阈压 |
| threshold capillary pressure | 临界毛细管压力 |
| threshold displacement pressure | 启动驱替压力 |
| threshold effect | 阈效应 |
| threshold energy | 阈能 |
| threshold frequency | 临界频率 |
| threshold injection pressure | 启动注入压力 |
| threshold lift characteristics | 临界升举特性 |
| threshold odor number | 嗅阈值 |
| threshold of nucleation | 成核临界温度 |
| threshold of sensitivity | 灵敏度界限 |
| threshold pressure | 阈压力；界限压力 |
| threshold recording system | 门限记录系统 |
| threshold strength | 界限强度 |
| threshold stress | 极限应力 |
| threshold supervision | 门限监测 |
| threshold temperature | 阈温度 |
| threshold value | 阈值 |
| threshold voltage | 门槛电压 |
| threshold weight | 阈重 |
| threshold | 阈值 |
| throttle manifold | 节流管汇 |
| thrust fold | 冲断褶皱 |
| tight fold | 紧闭褶皱 |
| tip-line fold | 尖顶褶皱 |
| top hold-down | 上部压板 |
| topographic old age | 老年地形 |
| transfer molding | 传递模塑 |
| transition folding | 过渡褶皱作用 |
| transverse fold | 横向褶皱 |
| tree manifold | 采油树管汇 |
| true folding | 真褶皱 |
| tube holder | 管夹 |
| tubular scaffolding | 管式脚手架 |
| two-phase Reynolds number | 两相雷诺数 |
| ultrasonic soldering | 超声波焊接 |
| underfold | 次生小型褶皱 |
| underground folding | 深带褶皱 |
| underground gas-holder | 地下储气罐 |
| undulate fold | 波状褶皱 |
| unfolded | 未褶皱的 |
| unfolding | 消褶皱作用 |
| uniclinal fold | 单斜褶皱 |
| unsymmetrical fold | 不对称褶皱 |
| upfold | 隆皱 |
| uphold | 支持；举起；赞成；确认 |
| upholder | 支持者；支持物 |
| upper apex of fold | 褶皱顶部 |
| upright fold | 直立褶皱 |
| vacuum cold trap | 真空冷阱 |
| vented-screw injection molding | 排气螺杆注塑 |
| vertical fold | 垂直褶皱 |
| violent folding | 剧烈褶皱作用 |
| virgation of fold | 褶皱分支 |
| voting right of stockholders | 股东表决权 |
| water holding capacity | 持水量 |
| water holdup | 持水率 |
| welding electrode holder | 焊条夹 |
| well control manifold | 井口控制管线装置 |
| well head fracturing manifold | 井口压裂管汇 |
| wet seal gas holder | 湿式储气柜 |
| wet storage holder | 湿式储气罐 |
| white cold | 浅淡色调 |
| white gold | 白金 |
| widely spaced fold | 宽阔褶皱 |
| withholding income tax | 代扣所得税 |
| withholding tax | 预提税 |
| workholder | 工件夹具 |
| zone of fold | 褶皱带 |